Getbig Bodybuilding, Figure and Fitness Forums
Getbig Main Boards => Gossip & Opinions => Topic started by: jtsunami on January 06, 2009, 07:33:32 PM
-
If you want to post more than every 32 seconds, all you have to have is a desktop or laptop with 2 Network connections, take out your cable and plug it into the other one after you post your first post, then put it in the other one, it will let you keep posting :)
jt
-
If you want to post more than every 32 seconds, all you have to have is a desktop or laptop with 2 Network connections, take out your cable and plug it into the other one after you post your first post, then put it in the other one, it will let you keep posting :)
jt
Don't give Bluto any more ideas
-
lol, but seriously Ron needs to change this rule, this will work in the mean time, if you don't have an extra NIC port, you can always put one in your desktop and do it, really cheap.
jt
-
lol, but seriously Ron needs to change this rule, this will work in the mean time, if you don't have an extra NIC port, you can always put one in your desktop and do it, really cheap.
jt
This doesnt work on cable connection, the modem needs to powered down in order for the isp to assign a new ip address to the new nic mac address.
-
I hate the 32 sec limit thing.
Sometimes when i'm on a posting spree it really slows me down..... >:(
-
works for me, I am on t1 or something.
jt
-
If you want to post more than every 32 seconds, all you have to have is a desktop or laptop with 2 Network connections, take out your cable and plug it into the other one after you post your first post, then put it in the other one, it will let you keep posting :)
jt
prove it, i want to see two posts in under 20 seconds.
-
Not right now, I have my computer setup in my desk. It also works when Ron bans you by mac address, just plug into the other port and you are back on getbig :)
jt
-
Not right now, I have my computer setup in my desk. It also works when Ron bans you by mac address, just plug into the other port and you are back on getbig :)
jt
Or you could just change your original nics mac address, isnt hard.