Getbig Bodybuilding Boards > Steroids Info & Hardcore

AAS Studies/Literature & Newbie Cycle Info

<< < (2/25) > >>

Arnold jr:
I thought it would be interesting and helpful to post a thread that only deals with and explains Sustanon. There seems to be a lot of disagreement on this board as to if Sust is a "quality" compound, and I believe these ideals are formed more out of lack of information, rather than coherent fact. For some of you there is absolutely nothing new here, but for those less familiar this might help. For those who are well informed concerning Sust, feel free to add anything I might have overlooked.


Sustanon is a very good choice because it offers a number of advantages when compared to other Testosterone products. Sust is made up of 4 different testosterone's based on a timed composition that are mixed to form a synergetic effect. This allows Sust to have 2 positive characteristics: First, based on the combination effect of the compounds, Sust, mg for mg, has a better effect than Testosterone enanthate, cypionate, or propionate alone. Second, based on the mix of the 4 testosterone's (Testosterone propionate 30mg, Testosterone phenylpropionate 60 mg, Testosterone isocaproate 60 mg, Testosterone decanoate 100 mg) it is time released so that it becomes active quickly and remains active for several weeks. It becomes active so quick because of the propionate and remains active for an extended, 3-4 weeks, because of the mix of the longer acting esters such as decanoate.

Those who use Sust can expect a solid muscle growth, and they can expect to have considerably less water retention then if they used testosterone enanthate or cypionate. Those who are uncomfortable with large amounts of water retention and fight against elevated estrogen levels, choose Sust over the long-acting depot testosterone's.

Another advantage of Sust, is that those who have taken it before, can usually experience similar gains with the same dosage as the previous cycle. Dosage usually ranges anywhere form 250mg/wk up to 1000mg+ per day. But for the responsible user the average intake is 250mg/wk-1000mg/wk; a dosage of 500mg/wk is normally enough for most. Many argue as to how often Sust should be administered; some advocate frequent injections, 3-4x per wk, while others claim 1wk- once every 10 days. Those who advocate less frequent injections believe that since Sust is partly composed of long-acting esters, the more frequent administration is unnecessary. But those, like myself, who advocate more frequent injections understand that in order to keep test levels even, it is important to inject frequently; this is in part due to the propionate that is mixed in the compound

Although Sust does not aromatize excessively, when taken in a reasonable dosage many people, in addition, also take an anti-estrogen, to prevent possible estrogen linked side effects. Since Sust suppresses the endogenous testosterone production the intake of HCG and or Clomid should be considered. Normally, the intake of HCG during the cycle is sufficient, although it is not uncommon for it to be taken at the end as part of PCT.

The side effects of Sust are similar to those of Testosterone enanthate, but they are usually less frequent and less severe.  Depending on the dosage and predisposition to side effects, the user could experience: acne, aggressiveness, sexual over stimulation, oily skin, accelerated hair loss, as well as reduced production of the body's own hormones, which occurs with the intake of every type of testosterone. Gynecomastia is usually not that common with Sust, but if it does occur, it is not as massive as with enanthate or cypionate. Liver damage is unlikely with Sust, but in very high dosages, elevated liver values can occur which, after discontinuing use, usually go back to normal. The fact is that the liver is a very efficient organ and able to cope well with higher quantities of testosterone. "The liver is able to metabolize an almost unlimited amount of testosterone; 2 g of rat liver are able to break down 100 mg/day of testosterone.” Page 54 Doping-verbotene Arzneimittel by Dirk Clasing and Manfred Donike.


Arnold jr:
The many faces (names) of Tren: ENDING THE CONFUSION

--------------------------------------------------------------------------------

I have been reading about Tren and have found wide spread confusion about it mainly because when one writes "Tren," s/he could be referring to at least 5 different compounds:

1. Trenbolone Acetate--injectable version (Finaject and Finajet)
2. Trenbolone Acetate--pellet form (Finaplix)
3. Trenbolone Cyclohexylmethylcarbonat e (called Parabolan by Bill Roberts)
4. Trenbolone Hexahydrobencylcarbonate (called Parabolan on this board and several others)
5. Trenbolone Enanthate

The many names of tren have confused many people. I've seen VETs and MODs and MEMBERs of several boards (not just this one) equate one tren compound with another, not knowing that one is actually not equivalent to the other. One common mistake I see is calling Trenbolone Hexahydrobencylcarbonate "Tren Enanthate." They are similar, but not the same (see below). I also have seen people refer to Tren Acetate as Parabolan--wrong!

So, let's clear this up.

The following is a brief summary of the main differences of each that I have created in order to clear up my own confusion on tren and hopefully help others here in the process. It is not meant to provide a detailed description of Tren activity in the body.

1. Trenbolone Acetate--injectable version (Finaject and Finajet)
This is correctly referred to as "Fina." Finaject is the acetate form of trenbolone. It was produced in a short acting ester (acetate), so its effect lasts only a short time and frequent administration is necessary. Finaject was an injectable steroid of veterinary medicine, which was extremely popular in bodybuilding and powerlifting during the 1980's. The injectible Trenbolone Acetate called Finaject is no longer produced.

(Refer to the end of this post for a discussion of Esters)

2. Trenbolone Acetate--pellet form (Finaplix)
Finaplix was a veterinary cattle implant, which contained the potent androgenic steroid Trenbolone Acetate. Once Finaject and Finajet were guy manufactured, bodybuilders began using Finaplix to make topical or injectible versions of Trenbolone Acetate.

Today, cattle implants have become designer products with varied doses and combinations of estrogenic and/or androgenic (trenbolone) agents. So, the process of converting cattle implants to useful versions of trenbolone acetate has become more dificult since one must separate the trenbolone from the other additives present in the cattle implants before using it.

3. Trenbolone Cyclohexylmethylcarbonat e (called Parabolan by Bill Roberts)
Parabolan contains a much different ester than Finaject and Finajet, called Trenbolone Cyclohexylmethylcarbonat e. This ester extends the activity of trenbolone for more than two weeks, a more suitable design for human use.

The amount of trenbolone in 76 mg of Trenbolone Cyclohexylmethylcarbonat e is equivalent to the amount of trenbolone in only 58 mg of Trenbolone Acetate. The acetate is a little more potent, more effective per milligram, because the acetate ester is lighter than the cyclohexylmethylcarbonat e ester; therefore a higher percentage of the weight of Trenbolone Acetate is trenbolone. A similar comparison also can be made with the other long lasting esters of trenbolone: enanthate and hexahydrobenzylcarbonate .

The muscle building properties of Trenbolone Cyclohexylmethylcarbonat e are the same as Trenbolone Acetate (Finaject or Finajet) except for the longer half-life.

Although it is very similar, this compound is NOT the same as Trenbolone Enanthate. The only difference in these compounds is the esters (see ester definitions below), which all act almost identically (long lasting esters).

4. Trenbolone Hexahydrobenzylcarbonate (called Parabolan on this board and some others)
NOTE: At the time of this post this compound name was spelled wrong (hexahydrobencylcarbonate) in the steroid profiles. The correct spelling is listed above.
Trenbolone Hexahydrobenzylcarbonate and Trenbolone Cyclohexylmethylcarbonat e are exatly the same substances. Hexahydrobenzylcarbonate ester is just another name for cyclohexylmethylcarbonat e ester.

5. Trenbolone Enanthate
Although it is very similar, this compound is NOT the same as Trenbolone Cyclohexylmethylcarbonat e (Trenbolone Hexahydrobenzylcarbonate). The only difference in these compounds is the esters (see ester definitions below).


THE DIFFERNCE BETWEEN THE ESTERS

The most important difference between the esters is wheter it is a short acting ester or a long lasting ester. The next most important difference is the weight of the ester. As mentioned under the Trenbolone Cyclohexylmethylcarbonat e section (above), the relative potency of each ester of trenbolone is parially dependent on the weight of its ester.

The main difference between different esters is simply the number of carbon atoms in the ester. Propionate has three carbons, acetate has two, isobutyrate has four, enanthate has seven, cypionate has eight, and decanoate has ten. More unusual esters, such as cyclohexylmethylcarbonat e (used in Parabolan) has eight carbons and one more oxygen than the above esters making it the heaviest.

Therefore, the esters of trenbolone in order of potency when compared miligram to miligram (from most potent to least):
1. Tren Acetate
2. Tren Enanthate
3. Tren Cyclohexylmethylcarbonat e (Tren Hexahydrobenzylcarbonate)

The differences in potency caused by the esters are negligible. So, you should base your choice of Tren on how frequently you plan to inject, how much you trust your supplier, and how much you trust the brand of tren you purchase.

If you are concerned about the possible side effects of tren, and don't mind frequent injections, then consider using Trenbolone Acetate. If bad side effects manifest, Tren Acetate will quickly leave your body after the last injection due to the short acting ester (acetate); and your body will be able to begin to recover quickly. On the contrary, your recovery from bad side effects won't begin until 2 weeks after the last injection of a long lasting ester of tren because a long lasting ester of tren will stay active in your body for more than two weeks after your last injection--continuing to contribute to the bad side effects.

Ron:
William Llewellyn wrote this article... thanks!

Arnold jr:
Thinking about doing steroids?? READ THIS!! Newbie Info.
Newbie Information:
Everything a Newbie needs to know before starting a cycle

Written By: Crankin'steiN From Fitnessgeared.com

HOW DO I KNOW WHEN I AM READY FOR MY FIRST CYCLE?

The general rule passed on to people is that you should reach your natural potential before starting a cycle of steroids. Obviously if everyone followed this rule, anyone who used would be almost 30 and older...... So, because everyone is not going to follow that rule, here is a rule that I think is a must! You should know how to train, diet, and rest properly to make the changes to your body that you want to obtain. Whether you want to lose fat or gain mass, you should have a good understanding of how to do so without the help of steroids, before you choose to use
steroids. The reason for this is because steroids are a "helper" they are not a miracle, that can transform your body well you sit on the couch. So you need to have the understanding of all the major aspects of bodybuilding, so that you can use steroids effectively.

OK, I KNOW HOW TO TRAIN, EAT AND REST. WHAT'S NEXT?

The next thing you should do is to start researching what you are going to be putting in your body, and what effects and side effects it will have. There is a plethora of information on the internet, so do some searches or research on some bodybuilding boards. Read about different substances and what kind of effect they have. Read about the side effects of them, and what to do about unwanted side effects. Read about how to cycle them, length of cycles, and Post Cycle Therapy (PCT). Also, read about Anti-estrogen's, as these are the drugs that will save you from gyno, and too much water retention. And after you have read about all of these things, then read them all over again to make sure you have absorbed what you read. When you are knowledgeable to answer the questions you had about steroids before you did your research, then you are probably ready for your first cycle.

THE FIRST CYCLE (AKA THE NEWBIE CYCLE)

*NOTE: You should have everything including post cycle therapy stuff, BEFORE you start your cycle!!

Your first step:

The first thing you will have to do is get over that fear of needles..... A cycle including nothing but oral steroids is not going to produce the results you want, period! Go to: www.spotinjections.com to research how to inject.

The Cycle - Anabolics

The most common Newbie Cycle is Testosterone Enthanate, run at 500mg per week for 10 weeks,split up into two shots per week (250mg on day 1, and on day 4). The cycle can be run with just Test. and good results should be seen. I personally like D-bol to be added with that cycle, but it doesn't need to be.
If it is added, it is run at 30mg a day for 4 weeks. The dosage should be split up during the course of the day, to keep blood levels as even as possible.

The Cycle - Anti-estrogen's

An anti-estrogen (usually Nolvadex or Arimidex) will need to be purchased to have handy in case gyno symptoms start. Itchy and sore nipples will tell you that you are getting gyno, and Nolvadex should be started (I use Nolva personally so I am showing Nolva dosages) at 60mg per day for 2 days, then 40 for one day, then 20mg for the rest of the cycle. There is one catch tho.... Nolvadex and Arimidex will only take care of estrogen driven Gyno...... Gyno that is caused by prolactin needs to be countered by using proviron. Prolactin induced gyno can occur from Trenbolone or Deca. (these are not used in your cycle so you don't have to worry about it...)

POST CYCLE THERAPY (PCT)

PCT can be run a few different ways..... I will outline on of the most common ways that it is run. If you don't want to do it this way, then it is easy enough to find an alternative way, by doing research.

2 weeks after your last shot of Test. Enth. you should be starting your PCT. The most common combo is to use clomid and nolvadex together. Clomid is run at 300mg day 1, 100mg day 2-14, and 50mg day 15-30. Nolva should be run with it at 20mg for the whole 30 days you are on clomid.

During PCT you should keep your caloric intake at or above the amount you would use for bulking. This will help you keep your gains, and stop you from going catabolic. Also you should train hard, so that you can keep your gains. Remember that you are not on any anabolics now, so you may have to bring your
volume down, and up your rest a little, so that you don't overtrain.

TIME OFF

Well now you have completed your PCT and your hormones should be getting back to normal. The general rule for time off is: TIME ON = TIME OFF. This should be followed. If you did a three month cycle, then you should wait three months after that last shot of test before doing another cycle. This will allow your
body to get back to normal and stay healthy.

txhulk:
Great post,how much armidex would you use?I've never used it.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version