Author Topic: QUestion about WINSTROL  (Read 5041 times)

old-school-lifter

  • Getbig IV
  • ****
  • Posts: 2685
QUestion about WINSTROL
« on: January 22, 2018, 01:47:55 PM »
hey guys

ive got some winstrol, expires 5/2019.

I noticed during the winter, when the temperature was cold , tiny bubbles started appearing in the oil and now some tiny sediment/crystals are forming on the insides of the vial?

is the steroid still safe to use and is it still effective?

any info much appreciated

thanks

heenok

  • Getbig IV
  • ****
  • Posts: 1434
Re: QUestion about WINSTROL
« Reply #1 on: January 24, 2018, 09:55:05 AM »
It means the winny crashed. It happens at low temp. Heat it untill the crystals melt and you are good to go.
It might be very painful if you inject a crashed product but it still works.

old-school-lifter

  • Getbig IV
  • ****
  • Posts: 2685
Re: QUestion about WINSTROL
« Reply #2 on: January 24, 2018, 08:12:08 PM »
yes, that's when it happened, during the winter

how do you heat up the vial without melting it?

thanks for your advices!

lilhawk1

  • Getbig IV
  • ****
  • Posts: 1083
Re: QUestion about WINSTROL
« Reply #3 on: January 25, 2018, 04:07:11 PM »
A glass vial isn't going to melt. 

old-school-lifter

  • Getbig IV
  • ****
  • Posts: 2685
Re: QUestion about WINSTROL
« Reply #4 on: January 29, 2018, 01:44:27 PM »
but it could crack?

the glass vials aren't exactly thick glass?

any one with any idea what temperature to heat the vial to?

illuminati

  • Competitors II
  • Getbig V
  • *****
  • Posts: 20808
  • The Strongest Shall Survive.- - Lest we Forget.
Re: QUestion about WINSTROL
« Reply #5 on: January 29, 2018, 03:19:54 PM »
but it could crack?

the glass vials aren't exactly thick glass?

any one with any idea what temperature to heat the vial to?

Heat in warm / hot water until crystals melt.

hgevoli

  • Getbig II
  • **
  • Posts: 44
Re: QUestion about WINSTROL
« Reply #6 on: January 31, 2018, 02:27:26 PM »
but it could crack?

the glass vials aren't exactly thick glass?

any one with any idea what temperature to heat the vial to?

Stick a needle in the top of the vial so it won’t explode and heat it until the crystals melt back. Swirl the bottle every 30 seconds or so and take it out as soon as the crystals reconstitute

old-school-lifter

  • Getbig IV
  • ****
  • Posts: 2685
Re: QUestion about WINSTROL
« Reply #7 on: February 01, 2018, 07:48:01 PM »
so the needle should be kept in the vial during the heating process?

thanks for tips guys

hgevoli

  • Getbig II
  • **
  • Posts: 44
Re: QUestion about WINSTROL
« Reply #8 on: February 02, 2018, 01:01:10 PM »
so the needle should be kept in the vial during the heating process?

thanks for tips guys

Yeah I always keep it in. Works great.

No prob OP

old-school-lifter

  • Getbig IV
  • ****
  • Posts: 2685
Re: QUestion about WINSTROL
« Reply #9 on: February 04, 2018, 03:32:25 PM »
thanks boss

will give it a try with slow heating

herraisland

  • Getbig III
  • ***
  • Posts: 694
Re: QUestion about WINSTROL
« Reply #10 on: February 12, 2018, 01:29:59 PM »
Heat it on pan.. i do it sometime in this disguasting tempature we have in this time

ARISTIMUQOH

  • Getbig II
  • **
  • Posts: 57
Re: QUestion about WINSTROL
« Reply #11 on: February 25, 2018, 04:32:55 AM »
hey guys

ive got some winstrol, expires 5/2019.

I noticed during the winter, when the temperature was cold , tiny bubbles started appearing in the oil and now some tiny sediment/crystals are forming on the insides of the vial?

is the steroid still safe to use and is it still effective?

any info much appreciated

thanks

REAL Winstrol is not oil based....