Getbig Bodybuilding, Figure and Fitness Forums
Getbig Bodybuilding Boards => Steroids Info & Hardcore => Topic started by: vinniedablade on November 27, 2005, 03:00:18 AM
-
yo
a friend tells me that he warms up his tess shot in the microwave for 10 sec before he injects it
so he can use a smaller gage needle . question will heating up tess in the microwave hurt it ?
i ask because i don't know ???
Vinnie
-
i dont think so but i know if i t gets hot enough it can destroy some of the actual test. i have heard of people doin this but in all honesty, i dont think it needs no be done.
muscle
-
i was taking prop once and was just setting the bottle in warm water it does help to thin it out, but i soon saw that insted of it being a nice clear yellow oil was now still yellow but cloudy looking, but i also found out you don't need to warm up anything when using a 25g needle less is primo....
IMO you don't need to warm it up.. just get a stronger thumb.
-
yea a friend of mine used the microwave too but he filled the pin up and put the pin in the microwave. supposedly it works but i have never done it. sounds like a dumb idea to me.
-
warming it up will kill some extra germ in the bottle and i see no need to do this for just shooting it
-
To my thinking, doing this could possibly destroy some of the serum. It is supposed to be stored at or around room temp., so then wouldn't heating it up to 120 degrees, 150 degrees or more probably kill some of (or all) the active ingredients?
-
no when it was make it had to be heated to high temps...after a while yes it might lose some mg
-
yo
a friend tells me that he warms up his tess shot in the microwave for 10 sec before he injects it
so he can use a smaller gage needle . question will heating up tess in the microwave hurt it ?
i ask because i don't know ???
Vinnie
If you must, boil some water and set the vial in there before you shoot.
It's really unnecessary.
DIV
-
Ah just use a bigger pin if its too slow.
-
If you buy your gear in 300-400 mg/ml then the stuff gets thick...even through a 23 it's really slow...
What i learned from the vets is to buy a re-usable heating pad, the kind with the jelly in it...
Nuke it nice and hot...and roll the vials into it, letting it stand for about 10 minutes....
Gear will draw fast, and pin fast...
-
i've site-shot test in bi's and tri's thru a insulin pin (just back-filled the pin) it was a little slow but not so slow that it need to be heated.
-
i've put it in the microwave and the needle got zapped and turned black... true
try puting it in a hot glass of water instead.
-
Guys, I'm not a homo, but I use a cream called Xylocain. It numbs the skin. I put it on, watch TV for half an hour and then bang it in. Doesn't hurt as much, and sometimes doesn't hurt at all. If you're gonna do it, you might as well make it as pain free as possible.
-
Guys, I'm not a homo, but I use a cream called Xylocain. It numbs the skin. I put it on, watch TV for half an hour and then bang it in. Doesn't hurt as much, and sometimes doesn't hurt at all. If you're gonna do it, you might as well make it as pain free as possible.
It's not that much pain at all, I don't see what you guys are complaining about? ???
If you numb up the area and inject and pass through a vein you won't know it till you get a bleeder......
DIV
-
It's not that much pain at all, I don't see what you guys are complaining about? ???
If you numb up the area and inject and pass through a vein you won't know it till you get a bleeder......
DIV
Whoooaaaaaa! We got a bleeder!!!!!!!!!!!!!!!!!!!!!!