Getbig Bodybuilding, Figure and Fitness Forums

Getbig Bodybuilding Boards => Training Q&A => Topic started by: Don_Dada on October 31, 2009, 05:35:51 PM

Title: Seated Hammer Strength Incline Presses
Post by: Don_Dada on October 31, 2009, 05:35:51 PM
Do you feel this a great exercise for upper pecs? I talked to some guys that said they feel the movement too strongly in their triceps.
Title: Re: Seated Hammer Strength Incline Presses
Post by: tonymctones on October 31, 2009, 05:40:32 PM
good for working with injuries, id still do bar or db's but ive done these before and they are good pieces of equipment in my opinion
Title: Re: Seated Hammer Strength Incline Presses
Post by: buffbong on October 31, 2009, 06:08:20 PM
definatly a good alternative to alternate into your workout. if tris are taking over most likely they are holding the handles to close
Title: Re: Seated Hammer Strength Incline Presses
Post by: Montague on October 31, 2009, 07:52:19 PM
^^Yes, and one could also try flaring the elbows a bit as well as lowering the seat enough so that the press is started from higher up (closer to the clavicle).

Using similar form even on flat presses tortures the upper pec fibers.

Title: Re: Seated Hammer Strength Incline Presses
Post by: Meso_z on November 01, 2009, 10:12:26 AM
I dont feel the icline hammer press on my upper pecs either.

I use hammer machines only for flat press.
Title: Re: Seated Hammer Strength Incline Presses
Post by: Taylor on November 04, 2009, 04:46:08 PM
nothing beats the strait bar or DBs. Move the incline up or down a little.The hammer restricks the motion to much. The more freedom the better.
Title: Re: Seated Hammer Strength Incline Presses
Post by: JasonH on November 05, 2009, 04:48:38 AM
It's a decent exercise if done properly - don't lock out - squeeze the contraction almost at the top of the rep - no need to bring it all the way back either - just enough so you can feel the pecs stretch.
Title: Re: Seated Hammer Strength Incline Presses
Post by: CalvinH on November 05, 2009, 06:11:17 AM
What he said^^^