Getbig Bodybuilding, Figure and Fitness Forums

Getbig Female Info Boards => Womens Physique, Bodybuilding, Wellness and Training => Topic started by: ripitupbaby on July 17, 2007, 10:55:37 AM

Title: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 10:55:37 AM
There are several approaches to incorporating ARMS (biceps and triceps) into your training split:

(1) Have a separate day for ARMS.  Hit both bis and tris on this day.  This is the approach I use.  I try to do three exercises for bis and three for tris, with usually 3-4 sets each exercise.  These are relatively small muscles, so I think that 9 sets is really adequate to work them.  Plus, you also work them when you train other larger muscles (see below)

(2) No separate day just for arms. 
Hit bis on back day since back workouts already engage the bis.  Hit tris on chest or shoulder day since chest and shoulder workouts already engage the tris.  Do bis and tris after you train the larger muscle group (back, chest, or shoulders). 

OR.....

Hit bis on chest or shoulder day, and hit tris on back day.  Some people feel that it is more effective to train the arm muscles on the days when they are not being hit by other training.  For example, if you train biceps after a back workout, your biceps have already been worked by the back workout, so you may therefore not be as strong on the bicep exercises as you could be if your biceps were less exhausted.  So you would hit your triceps on back day instead, since you don't engage the tris nearly as much when doing back.  And then hit the biceps on chest or shoulder day for the same reason.

(3) TWO separate days just for arms. 
This is what people who have identified their arms as their weak spot and want to train specifically to build more size in this area.  Branch Warren trained his arms twice a week for a long time in an attempt to catch them up to his legs...he still may do this, actually, I am not sure.
In this case, plan on one HEAVY day of arm training and one LIGHT day of arm training.  The light day should incorporate lighter weights, higher reps, and less rest between sets.


Title: Re: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 10:56:23 AM
EXERCISES

In terms of how to structure ARM workouts, like I said before, the arm muscles are relatively small, so it doesn't take alot to work them hard, and they get hit pretty good when working other, larger muscles.  I think that a workout consisting of 3-4 exercises, 9-12 sets total, is more than enough for a good bicep or tricep workout.

BICEPS
Note that "bi" in "biceps" indicates two parts, called "heads." The biceps has a common attachment below the elbow, and then splits into two parts as it ascends the arm toward its upper attachments.

Exercises can vary quite a bit, but I usually recommend structuring a workout that includes some form of:

(1) Dumbell Curls - These can be done the "standard" way, standing and curling with alternating arms and bringing the weight from your side all the way to the top while supenating the wrist (turning it outward to maximize the squeeze) at the top. 
-Another variation is to curl them alternating or together like you would curl a straight barbell.  Keep the wrists pointed outward/upward the entire range of motion...hold the two dumbells in front of your body like you would hold a barbell and curl them this way, keeping your elbows pinned to your sides.  Go for the entire range of motion.
-Another good variation is to do the curls while seated on an incline bench.  This provides a really good range of motion and REALLY isolates the biceps.  This is one of my favorite exercises for biceps.  The upper part of the arm (shoulder to elbow) should not move and should remain at your sides.

(2) E-Z Bar Curls - The EZ bar is the bent bar that you can hold on to with a close grip or a wide grip.  The wider the grip, the more the inner head of the biceps brachii muscle is emphasized, and the narrower the grip, the more the outer head is emphasized.  I usually do a few sets of both, actually, in addition to dumbell curls and hammer curls.

(3) Hammer Curls - Hammer curls are done with the wrists facing each other the entire time ("neutral" grip).  Your hand is in the position it would be in if you were using a hammer.  The weight should be curled with your elbows essentially attached to your sides and not moving at all.  Hammer curls focus on the forearm in addition to the bicep.  For whatever reason, I like to do this exercise as a drop set to failure...meaning I start with a heavy weight and curl as many times as I can, then immediately drop to a lighter weight and do it again, and then immediately to a lighter weight and go to failure (for example, 20s, then 15s, then 10s).

(4) Alternative Bicep Exercises - There are tons of variations that can be included in a bicep program.  A few that I like to use to mix things up include:
---Cable exercises.  These are all done with the cables in a low position, near the ground, so that you can curl upwards.
-Sometimes I do the EZ bar curls on the cable machine instead of with the EZ bar.  These can be done wide grip or close grip just like the EZ bar.
-Sometimes I use the rope for hammer curls on the cable machine.  Just grab the ends of it to curl, and you automatically assume the hammer position with your hands.  You can pull the rope apart at the top for extra contraction.
-One handed cable curls.  You can use the cable and handle to do curls one hand at a time.  This is particularly good if you want to do them with a reverse grip and engage the forearm more.
---Reverse Curls.
-I use a straight barbell and do reverse-grip curls sometimes to really hit the forearms.  Hands should be "upside down" on the bar and shoulder width apart.  This is a good exercise to help lengthen the bicep muscles as well.
---Preacher Curls.  On the preacher bench (the one that kind of looks like a pulpit, see below).  I prefer to use dumbells and go one arm at a time, as I feel that the barbell strains my wrists too much.  This exercise should be done with relatively light weight and FULL range of motion.  Form is very important on these.  Do not throw your shoulder or back into this exercise...if you do find that you are throwing your shoulder forward, then the weight is too heavy.
---Bicep Machines.
-I am not a huge fan of bicep machines.  I prefer free weights for biceps so that I can always work the two biceps independent of each other...but if there is one that you feel is good and that you are comfortable with, you can add this to your program once in a while for variation.

Some exercises that I have found to be a waste of time for biceps include:
---Hercules Curls.  This is another shaping exercise that is usually done on a twin tower multi-station setup with high cable hookups. Standing centered between the towers, holding the cable handles with a supinated grip, and with your arms fully extended, laterally, from your shoulders; now, while maintaining your arms parallel to the floor, curl your hands toward your head - you will now look like Hercules in a double biceps pose.  Personally, I find that this exercise engages other muscles and does not focus enough on the bicep, esp if you try to go heavy.  You may look cool doing it, but I really don't think you get enough out of it to spend the time.
---Specific Forearm exercises.  I do not focus any specific training on my forearms except for things like reverse bicep curls and some of the exercises mentioned above.  The forearms get plenty of work through regular training, especially for women, and especially if you use alot of free weights.  Just gripping heavy dumbells for things like chest presses will increase your forearm strength.  No need to sit there and do those silly wrist curls, it's a waste of time.


When training biceps, it is extremely important to not engage your other muscles like your shoulders and back.  This is accomplished by using your elbow as a hinge for bicep curls.  You should not be swinging your upper body at all...it should remain completely still and upright.  Your elbows should remain "glued" to your body (either your side or the front of your body, depending on the exercise).  Except for the contraction of the bicep, the only thing that should be moving is the part of your arm from your elbow to your fingers.

Title: Re: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 10:56:48 AM
TRICEPS
Note that "tri" in "triceps" indicates three parts - a long head which originates at the scapula, a lateral head which originates at the back of the arm (humerus) and the short head which originates on the humerus a bit lower than the lateral head.

Exercises can vary quite a bit, but I usually recommend structuring a workout that includes some form of:

(1) Cable Extensions - There are so many ways to use cables for triceps. I usually incorporate two of the following into each tricep routine:
-Straight bar extentions.  Hands should be shoulder width apart.  Full range of motion.
-Close grip extentions.  These are done with the cable grip that looks like a triangle shape.  The palms end up facing each other in a closer grip.
-Rope extensions.  Use the rope and lighter weight so that you can get a full extension.  At the bottom, pull the ends of the rope as far apart as you can and hold it there, contracting the tricep fully.
Rope extensions can be done like a french press as well...turn around so that you have your back to the cable and pull the rope over your head and fully extend.
-Reverse extensions (one hand at a time).  Reverse your grip so that your palm is facing upwards during this exercise.  Full extension and be sure to "glue" your elbow to your side, and do not let your shoulder drop during the extension. 

(2) Skull Crushers with the E-Z Bar - This is my favorite tricep exercise!  It focuses most on the large inner head of the tricep muscle and tones up what can commonly give women the ole' "lunch lady arms."   :D
Use a barbell and an incline bench (I prefer the EZ curl bar b/c it is more comfortable on the wrists, and I like the incline bar because it eases pressure on the back and allows you to see your movement in the mirror).  Grip it with your hands place a bit narrower then shoulder width. Press the barbell up until it is at arms length above your shoulders.  Moving only your forearms lower the barbell in an arc motion until it is an inch above your forehead (like you are going to crush your skull).  Using your triceps strength push the bar back up in an arc motion to the starting position.  Your arm should NOT swing at all between the shoulder and elbow.

(3) Alternative Tricep Exercises - There are tons of variations that can be included in a tricep program.  A few that I like to use to mix things up include:
---Dumbell Tricep Extensions.  These are done with dumbells one arm at a time.  You can do them standing up and bent over holding a bench with one hand and doing the extension with the other.  Be sure to keep your elbow "glued" to your side so that the only part of the arm that moves is between your elbow and your fingers.
---Tricep Dips. I prefer doing dips on a weight-assisted machine to prevent over-extending and possibly injuring the shoulders. This exercise is great for the triceps but also hits the chest and fronts of the shoulders ALOT....and can be dangerous if you over-extend or fail at the bottom.  I do not recommend doing these in between benches with weights on your lap...not necessary and a recipe for injury since your arms are so far behind you.  The weight assisted machine is the way to go unless you are a very advanced trainer and can do them with your own body weight.
---Close Grip Bench Press or Close Grip Pushups.  These are great exercises to incorporate into your tricep workout if you work triceps on the same day as chest.  Either way, close grip bench press or pushups focuses more on the front shoulders and triceps in addition to the chest.  Go as close as you can comfortably for your wrists and shoulders.
---Tricep Machines.  Similar to biceps, I am not a huge fan of tricep machines and prefer to do most of my tricep training using free weights and cables.  The ONE machine that I do like is the one where you rest your elbows on a pad and press the weight forward using two handles (see pic below).  This is a good machine to substitute for skull crushers if you are working alone and do not want to do skull crushers without a spot.


When training triceps, it is extremely important to not engage your other muscles, especially your shoulders and back.  This is accomplished by using your elbow as a hinge for tricep extensions.  You should not be swinging your upper body at all...it should remain completely still and upright.  Your elbows should remain "glued" to your body (either your side or the front of your body, depending on the exercise).  If you find that you are dropping your shoulder into the exercise, especially on cable extensions, then you are using weight that is too heavy.  Best to drop the weight and focus on the form.  Make sure your upper body is not moving at all.


Title: Re: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 10:57:12 AM

Although I do tend to mix it up A LOT with arms, a "normal" ARM workout would look something like this for me:

-Dumbell bicep curls - 1 warmup set, 3 heavy sets
-EZ Bar curls - 2 heavy sets close grip, 2 heavy sets wide grip
-Hammer curls - 3 drop sets to failure
-Reverse Curls - 2-3 sets with straight barbell
-Cable tricep extentions - 1 warmup set and 3 heavy sets with either straight bar or close grip bar
-Skull Crushers - 3 heavy sets with EZ curl bar on incline bench
-Rope tricep extensions - 3 sets holding rope apart at bottom
-Either 2-3 sets of close grip bench press or weight assisted tricep dips.

Also, let me know if you have any questions about what the specific exercises/machines I mentioned look like, and I can try to dig up a picture for you.  Other suggestions and recommendations are always welcome.'

 :)
Title: Re: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 11:15:20 AM
A few pics, using GUYS to illustrate the exercises...don't ask me who these guys are, I have no idea...I was just looking for some pics.  ;D

Biceps - hammer curls and incline dumbell curls

Triceps - Kickbacks and Skull Crushers on a FLAT Bench.  I do prefer using an incline bench for skull crushers, as it results in less pressure on the lower back and allows you to see your movement in the mirror.

 :)
Title: Re: ARM TRAINING
Post by: Butterbean on July 17, 2007, 11:41:14 AM
A few pics, using GUYS to illustrate the exercises...don't ask me who these guys are, I have no idea...I was just looking for some pics.  ;D

Biceps - hammer curls and incline dumbell curls

Triceps - Kickbacks and Skull Crushers on a FLAT Bench.  I do prefer using an incline bench for skull crushers, as it results in less pressure on the lower back and allows you to see your movement in the mirror.

 :)


Who are those guys?   ;D

Thanks for all this info Rip you really put a lot of thought and work into this thread and I'm not the only one who appreciates it :)
Title: Re: ARM TRAINING
Post by: Butterbean on July 17, 2007, 11:42:45 AM
Although I do tend to mix it up A LOT with arms, a "normal" ARM workout would look something like this for me:

-Dumbell bicep curls - 1 warmup set, 3 heavy sets
-EZ Bar curls - 2 heavy sets close grip, 2 heavy sets wide grip
-Hammer curls - 3 drop sets to failure
-Reverse Curls - 2-3 sets with straight barbell
-Cable tricep extentions - 1 warmup set and 3 heavy sets with either straight bar or close grip bar
-Skull Crushers - 3 heavy sets with EZ curl bar on incline bench
-Rope tricep extensions - 3 sets holding rope apart at bottom
-Either 2-3 sets of close grip bench press or weight assisted tricep dips.


Thanks we plan to do this workout next week :)
Title: Re: ARM TRAINING
Post by: ripitupbaby on July 17, 2007, 12:24:06 PM
Who are those guys?    ;D

Thanks for all this info Rip you really put a lot of thought and work into this thread and I'm not the only one who appreciates it :)


Might as well throw in a little eye candy for the girls while I am at it, ya know.   ;)


Title: Re: ARM TRAINING
Post by: ~flower~ on July 19, 2007, 06:11:42 AM
Thanks Rip!!

   I am going to use the "Print" button and print these threads out.
 

           :D
Title: Re: ARM TRAINING
Post by: az on July 19, 2007, 05:42:06 PM
did shoulders, tri's and bi's today.
 for tris' I start out with body dips (progress to weighted)
then skulls combo with close grip
then hammer dip (sometimes)
then press downs
finish with rope

My tri's lag so I try to work em hard (as hard as my elbow can take!)

Title: Re: ARM TRAINING
Post by: Luv2Hurt on July 20, 2007, 04:28:36 AM
Although I do tend to mix it up A LOT with arms, a "normal" ARM workout would look something like this for me:

-Dumbell bicep curls - 1 warmup set, 3 heavy sets
-EZ Bar curls - 2 heavy sets close grip, 2 heavy sets wide grip
-Hammer curls - 3 drop sets to failure
-Reverse Curls - 2-3 sets with straight barbell
-Cable tricep extentions - 1 warmup set and 3 heavy sets with either straight bar or close grip bar
-Skull Crushers - 3 heavy sets with EZ curl bar on incline bench
-Rope tricep extensions - 3 sets holding rope apart at bottom
-Either 2-3 sets of close grip bench press or weight assisted tricep dips.

Also, let me know if you have any questions about what the specific exercises/machines I mentioned look like, and I can try to dig up a picture for you.  Other suggestions and recommendations are always welcome.'

 :)

I do similar also. I like the overall volume. I will usually do 3 exercises for 4 sets with a drop set or 2 in there maybe.  Another thing I will do is alternate between bis and Tris, meaning one exercise for bis, the next for Tris.  That bicep pump really gives you something to push from on the tri work :)
Title: Re: ARM TRAINING
Post by: corinth on July 20, 2007, 09:59:23 AM
Rip, what triceps exercise do you feel best works the outer head?
Title: Re: ARM TRAINING
Post by: ripitupbaby on July 20, 2007, 11:31:11 AM
Rip, what triceps exercise do you feel best works the outer head?


The outer head is aka the "lateral head" and is really the meaty part of the tricep that gives it a horseshoe shape, and that should be sticking out of your shirt if you are doing it right.   8)

If I recall correctly... :-\...I was told once that the outer head does not connect to your shoulder like the other parts of the triceps do, so focusing on the outer head should be done using exercises where the other parts of the triceps are not stretched or engaged as much...and this would be when you have your arms at your sides (versus overhead).

I think that the best exercise specifically for the outer head is the standing straight bar cable push down/extension
Hands grab the bar shoulder width apart, and elbows remain glued to your sides.  Use a full range of motion and contract at the bottom.  Don't drop your shoulders into it either, make the triceps do all the work, particularly the outer head.

Another way to work the outer head more is to do these with a reverse grip (palms facing upward).  You can do them one arm at a time. 
I like to superset straight cable push-downs with one handed reverse push-downs, actually.   ;D

Tricep dips hit the outer heads very well too, but they are less isolating, as they engage the front delts and upper pecs as well. 

I have always found that tricep extension machine (pictured above in this thread) to be a good one for the outer head as well.  But I don't think that you can beat the straight bar cable push-downs if you want to really isolate this part of the tricep.

Title: Re: ARM TRAINING
Post by: ripitupbaby on July 24, 2007, 06:37:29 AM
I do similar also. I like the overall volume. I will usually do 3 exercises for 4 sets with a drop set or 2 in there maybe.  Another thing I will do is alternate between bis and Tris, meaning one exercise for bis, the next for Tris.  That bicep pump really gives you something to push from on the tri work :)


I did the alternating bi-tri workout last week and it definitely kicked my ass.  I did supersets (one bi exercise and one tri exercise), so I was able to cover alot of ground in one workout.  My arms got painfully pumped, and my biceps were sore at the insertions, which is unusual for me (my biceps hardly ever get sore).

THREE SUPERSETS EACH:
---Dumbell bicep curls, straight bar tricep cable push downs
---EZ Bar bicep curls with close grip, rope tricep push downs
---Seated incline dumbell curls with arms turned outward (for inner head), weight-assisted tricep dips
---Preacher curl bicep machine, tricep machine
---2 sets each of dumbell hammer curl drop sets, and reverse grip one handed tricep cable pushdowns


OUCH!    ;D


Title: Re: ARM TRAINING
Post by: Luv2Hurt on July 24, 2007, 02:00:08 PM

I did the alternating bi-tri workout last week and it definitely kicked my ass.  I did supersets (one bi exercise and one tri exercise), so I was able to cover alot of ground in one workout.  My arms got painfully pumped, and my biceps were sore at the insertions, which is unusual for me (my biceps hardly ever get sore).

THREE SUPERSETS EACH:
---Dumbell bicep curls, straight bar tricep cable push downs
---EZ Bar bicep curls with close grip, rope tricep push downs
---Seated incline dumbell curls with arms turned outward (for inner head), weight-assisted tricep dips
---Preacher curl bicep machine, tricep machine
---2 sets each of dumbell hammer curl drop sets, and reverse grip one handed tricep cable pushdowns


OUCH!    ;D




Now that should do it! You know when you get sore like that, your gonna grow!  I really like your style can tell you hit it hard  8)   

Ohhh.... ripitup your so yummy.
Title: Re: ARM TRAINING
Post by: Butterbean on July 24, 2007, 02:42:37 PM


-Dumbell bicep curls - 1 warmup set, 3 heavy sets
-EZ Bar curls - 2 heavy sets close grip, 2 heavy sets wide grip
-Hammer curls - 3 drop sets to failure
-Reverse Curls - 2-3 sets with straight barbell
-Cable tricep extentions - 1 warmup set and 3 heavy sets with either straight bar or close grip bar
-Skull Crushers - 3 heavy sets with EZ curl bar on incline bench
-Rope tricep extensions - 3 sets holding rope apart at bottom
-Either 2-3 sets of close grip bench press or weight assisted tricep dips.

Did this today...we might not like you tomorrow Rip :)
Title: Re: ARM TRAINING
Post by: ripitupbaby on July 24, 2007, 05:36:24 PM
Now that should do it! You know when you get sore like that, your gonna grow!  I really like your style can tell you hit it hard  8)   

Ohhh.... ripitup your so yummy.


You know it baby...heavy and hard is how I like it.    8)

 :-*


Did this today...we might not like you tomorrow Rip :)


Next week, try the arm workout I just posted...you will LOVE me.   :)

Title: Re: ARM TRAINING
Post by: ~flower~ on July 24, 2007, 06:04:17 PM
I am doing bi's and tris on separate days (I asked Rip to kick me in the ass and she is!!  ;D ) and I did the bi workout last Thursday, and Saturday and Sunday I had to do deep tissue massage on my left bicep!!   ::) I could not even straighten my arm out. In the middle of the night I would heat it, massage it, then physically straighten my arm out by holding it so I could sleep. If I moved and bent my arm again it would tighten up again.

  The right one hurt too, but the left was so much more that the right one was not noticeable!    It is better now, but I still have to force myself to straighten it fully.   I will be taking it a bit easier for awhile.   :P

 Do I have to fry the right one this week or I will be lopsided?    ::)
Title: Re: ARM TRAINING
Post by: ripitupbaby on July 24, 2007, 07:11:45 PM
I am doing bi's and tris on separate days (I asked Rip to kick me in the ass and she is!!  ;D ) and I did the bi workout last Thursday, and Saturday and Sunday I had to do deep tissue massage on my left bicep!!   ::) I could not even straighten my arm out. In the middle of the night I would heat it, massage it, then physically straighten my arm out by holding it so I could sleep. If I moved and bent my arm again it would tighten up again.

  The right one hurt too, but the left was so much more that the right one was not noticeable!    It is better now, but I still have to force myself to straighten it fully.   I will be taking it a bit easier for awhile.   :P

 Do I have to fry the right one this week or I will be lopsided?    ::)


LOL flower omg, I feel your pain!   :D

I've totally been there before, lol that's why I am laughing.  Super sore biceps are rough...once mine are "broken in," they are tough to make sore.  But if I hit them hard after an extended time off...OUCH!!
The WORST is when you fall asleep on your arm in the bent position, and it goes numb...and then you wake up and move it and it falls completely open/straight.   :o :o :o

Motrin/Advil and alot of stretching is the best answer.

Unless you lifted in a completely lop-sided manner (which I doubt)....If your left arm is worse off from the workout, that may mean that you are right-side dominant, and your left arm/side is weaker.  It bore the brunt of the beating. 
I am eventually going to put a thread together on this topic, as I am very right-side dominant and you can see it in several of my muscle groups.  I'm always looking for ways to bring my left side up to par with the right side. 
Take a look at your left right muscles and see if one side is bigger than the other.  You can usually see it pretty easily in the biceps, quads, and calves.

One thing you don't need to do is try to beat your other side up next week LOL.  So that's good news!   :D

The best way to resolve this problem over the long-term is to try to incorporate as many uni-lateral exercises into your workouts as possible...that is, exercises that work the left and right sides independent of each other.  This includes all dumbell exercises.  There are also some machines that work the left/right independently, like the Hammer Strength machines.  If you work the two sides independently, one cannot compensate for the other and grow bigger/stronger. 

 :)

Title: Re: ARM TRAINING
Post by: Butterbean on July 25, 2007, 07:18:01 AM



Next week, try the arm workout I just posted...you will LOVE me.   :)



 :'(
Title: Re: ARM TRAINING
Post by: ~flower~ on July 25, 2007, 08:17:22 AM
I am right handed Rip, so that could be the reason it ended up sorer. 

 It will be an easier/lighter workout this week!!   ;D
Title: Re: ARM TRAINING
Post by: Bluto on July 25, 2007, 09:13:13 AM
"1) Have a separate day for ARMS.  Hit both bis and tris on this day.  This is the approach I use.  I try to do three exercises for bis and three for tris, with usually 3-4 sets each exercise.  These are relatively small muscles, so I think that 9 sets is really adequate to work them.  Plus, you also work them when you train other larger muscles (see below)"

thats exactly what i do for my arms

Title: Re: ARM TRAINING
Post by: ripitupbaby on August 01, 2007, 07:00:34 AM
Yesterday I tried something a little different. 

I have been slacking a bit lately, only making it to the gym a few times a week.   :-[

Anyway, ARM DAY is usually the first day that I will skip if I know that I am going to miss a few training days during a week. 
This is because you hit your arms quite a bit when doing back (biceps), chest (triceps), and shoulders (triceps). 

Yesterday was BACK DAY, so I decided to do some close grip work to hit my biceps a little more, and I also super-setted in a tricep workout.  Adding triceps did not make my workout that much longer because I was able to do them as supersets and move pretty quickly, since back exercises don't engage the triceps all that much, and vice versa.

In between my back sets, I squeezed in:

---straight bar cable tricep extensions (3 sets)
---rope extensions (3 sets)
---tricep machine (3 sets)

That's all it took to get a good pump/burn on the triceps.  I'll prolly add some bicep work into my shoulder workout later this week, and then arms are done without taking a day to do them.   ;D

Title: Re: ARM TRAINING
Post by: davidpaul on August 01, 2007, 07:09:30 AM
What do you think of cheat curls with a little more wegith, and using momentum?
Title: Re: ARM TRAINING
Post by: ripitupbaby on August 01, 2007, 07:12:48 AM
What do you think of cheat curls with a little more wegith, and using momentum?


Nothing wrong with that from time to time! 
It's always a good idea to get a feel for heavier weight, practice with it...that's the way you get stronger.  Eventually, the weight you do cheats with will become the weight you use for regular curls.   8)

I do a few good set of heavy cheats every couple of weeks or so when I am bulking.

Title: Re: ARM TRAINING
Post by: Luv2Hurt on August 03, 2007, 04:38:45 AM

Nothing wrong with that from time to time! 
It's always a good idea to get a feel for heavier weight, practice with it...that's the way you get stronger.  Eventually, the weight you do cheats with will become the weight you use for regular curls.   8)

I do a few good set of heavy cheats every couple of weeks or so when I am bulking.



Thats sounds reasonable.  Arms have always been hard for me, my genetics there are OK at best.  I have tried all kinds of different methods over the years with moderate success.  Heavy, high volume, low volume, supersets, drop sets, separate day for each bis and tris, light high rep just about anything I can think of!!  I know they will never be exactly like I would like them to be, but I still feel I can improve them.

Lately i have been using a little less weight and just trying to keep the form tight and tension on my bis and tris.  On both bodyparts it is important to try and keep your shoulders out of it and avoid too much swinging.  I have always been a believer in trying to move heavy weights in my training and I will go as heavy as I can now while still feeling the muscle working.  I have been making sure to get a good squeeze and contraction on each rep.  Also I have been focusing on making each arm work equally in the set, cause my left lags behind my right side. 

Here is something else, being so right sided I always start my sets with the right arm.....duhhh!  probally would be smarter for me to start with the weaker left side.....note to self.... get your head out of your ass, start sets with weaker side first.  ::)   :)
Title: Re: ARM TRAINING
Post by: ripitupbaby on August 03, 2007, 08:23:33 AM
Here is something else, being so right sided I always start my sets with the right arm.....duhhh!  probally would be smarter for me to start with the weaker left side.....note to self.... get your head out of your ass, start sets with weaker side first.  ::)   :)


This is a really good idea, and it's something that I should start doing too! 
My right bicep is very noticably larger and more defined than my left.   :-\
This is something that I HAVE to fix during this off-season.  I should start with the left arm when I do dumbell work and maybe do one extra rep on the left every set.

Title: Re: ARM TRAINING
Post by: Luv2Hurt on August 03, 2007, 10:35:17 AM

This is a really good idea, and it's something that I should start doing too! 
My right bicep is very noticably larger and more defined than my left.   :-\
This is something that I HAVE to fix during this off-season.  I should start with the left arm when I do dumbell work and maybe do one extra rep on the left every set.



Yeah Im thinking a little extra work for the lagging arm might not be a bad idea.
Title: Re: ARM TRAINING
Post by: Luv2Hurt on August 18, 2007, 05:12:24 AM
As of late I have come up with 2 new arm exercises that I like to work in to my routine.  They are both done on the seated cable row machine, alright I copied the triceps one from a PT who was doing them with a client  :P  Really they are just variations of stuff you guys may already do but I thought they seemed a little unique.

First is the cable concentration curl:  Attach a single hand handle to seated cable row machine.  Choose a light weight to get the feel.  Sit in normal position and grab handle.  The row machines at our gym have like a small platform where you put your feet on the rowing movements, I take the same leg as the arm I training and put it up on the platform.  Then I will rest the elbow of the arm I am working on my leg/knee area and will begin curling the weight, its a cool pull kind of right towards you and these will pump those babies up!

Second is overhead triceps extension:  Uses the same machine, attach a rope handle.  Sit upright facing backwards on the foot platform, your ass should be right in front of the low pulley.  Grab the rope, this is kind of awkward by yourself but with a spotter they can hand you the rope from behind, otherwise you sort of have to twist/pull into position.  Then begin doing overhead extensions when finished just let go of the rope it will not drop far. I have found these to be great.
Title: Re: ARM TRAINING
Post by: ripitupbaby on August 19, 2007, 02:16:40 PM
As of late I have come up with 2 new arm exercises that I like to work in to my routine.  They are both done on the seated cable row machine, alright I copied the triceps one from a PT who was doing them with a client  :P  Really they are just variations of stuff you guys may already do but I thought they seemed a little unique.

First is the cable concentration curl:  Attach a single hand handle to seated cable row machine.  Choose a light weight to get the feel.  Sit in normal position and grab handle.  The row machines at our gym have like a small platform where you put your feet on the rowing movements, I take the same leg as the arm I training and put it up on the platform.  Then I will rest the elbow of the arm I am working on my leg/knee area and will begin curling the weight, its a cool pull kind of right towards you and these will pump those babies up!

Second is overhead triceps extension:  Uses the same machine, attach a rope handle.  Sit upright facing backwards on the foot platform, your ass should be right in front of the low pulley.  Grab the rope, this is kind of awkward by yourself but with a spotter they can hand you the rope from behind, otherwise you sort of have to twist/pull into position.  Then begin doing overhead extensions when finished just let go of the rope it will not drop far. I have found these to be great.


Is the tricep excercise sort of like a french press using the rope and cable row?

Title: Re: ARM TRAINING
Post by: Luv2Hurt on August 19, 2007, 06:28:09 PM

Is the tricep excercise sort of like a french press using the rope and cable row?



Oui, Oui  :D Thanks it was kind of hard to explain it but yep, its really a pretty cool variation.  Give those babies a try to pack on new arm size!
Title: Re: ARM TRAINING
Post by: ripitupbaby on August 20, 2007, 07:15:37 AM
Oui, Oui  :D Thanks it was kind of hard to explain it but yep, its really a pretty cool variation.  Give those babies a try to pack on new arm size!


Will do!  I am getting my lazy ass back into the gym this week after a full week OFF training.  I haven't taken a full week off in so long, I can't remember.   I'll be thinking of you while I am beating myself up, Luv Baby!   :-*

Title: Re: ARM TRAINING
Post by: Luv2Hurt on August 20, 2007, 01:50:49 PM

Will do!  I am getting my lazy ass back into the gym this week after a full week OFF training.  I haven't taken a full week off in so long, I can't remember.   I'll be thinking of you while I am beating myself up, Luv Baby!   :-*



A week off is good, Im gonna do it after this upcomming show and I cant remember the last time I did it either.

Thinking of me? Well you sure do know how to make my day sweetie  :) little secret, when I think of you while training, its good for at least a couple more reps.  :-* thanks!
Title: Re: ARM TRAINING
Post by: ripitupbaby on September 03, 2007, 03:27:34 PM
I saw a guy in the gym today doing standing bicep curls...the kind where you bring the weight in towards your ribs as you curl.  Kind of like a twisted hammer curl. 

Any benefit to these? 

Title: Re: ARM TRAINING
Post by: The Squadfather on September 03, 2007, 03:58:22 PM
I saw a guy in the gym today doing standing bicep curls...the kind where you bring the weight in towards your ribs as you curl.  Kind of like a twisted hammer curl. 

Any benefit to these? 


you mean drag curls?
Title: Re: ARM TRAINING
Post by: trab on September 03, 2007, 04:03:38 PM
I saw a guy in the gym today doing standing bicep curls...the kind where you bring the weight in towards your ribs as you curl.  Kind of like a twisted hammer curl. 

Any benefit to these? 



Tendinitis?

Supinating curls is a invite for that to me. I'm better off just curling.
Try a fat Barbell if you can get hold of one... use for curls and bench press for a time.
It will show on arms and forarms.
When you go back to the Olympic bar, it then feels like a toothpick. It will crank up your benchpress.
Great for the grip, will come in handy for dealing w/ rude guys for you.  ;D  a Couple broken fingers for you Mr....
Title: Re: ARM TRAINING
Post by: ripitupbaby on September 04, 2007, 04:07:03 AM
I'll have to look for a fat barbell, I don't think that my gym has them.

These are not drag curls....I wish I knew what they were called (other than "pointless"   ;D).  It's a standing curl, but the motion is kind of inbetween a hammer curl and a concentration curl keeping the weight close to your body.  Kind of like the way you would move your arms if you were marching.  I see people doing them in the gym all the time with way too much weight and alot of swinging.

Title: Re: ARM TRAINING
Post by: trab on September 04, 2007, 05:20:52 AM
I'll have to look for a fat barbell, I don't think that my gym has them.

These are not drag curls....I wish I knew what they were called (other than "pointless"   ;D).  It's a standing curl, but the motion is kind of inbetween a hammer curl and a concentration curl keeping the weight close to your body.  Kind of like the way you would move your arms if you were marching.  I see people doing them in the gym all the time with way too much weight and alot of swinging.



Are you try'n 2 put more size on your arms?

Triceps- Dips. Not even full ROM. Work the lock-out.  4 & 5 boards on the chest benchpress, and/ or pin press lock-outs in the PL cage, top range of motion in these is the most iron  many can press w/  mainly Tris.
 These all good for adding triceps.

Biceps? I'm like'n seated DB curls lately, slight incline sometimes.
Cheat curls w/ BB also.
Jumpstretch bands give a searing finish pump for Bi's & Tris (Band Pressdowns)
Title: Re: ARM TRAINING
Post by: ripitupbaby on September 04, 2007, 08:26:25 AM
Are you try'n 2 put more size on your arms?

Triceps- Dips. Not even full ROM. Work the lock-out.  4 & 5 boards on the chest benchpress, and/ or pin press lock-outs in the PL cage, top range of motion in these is the most iron  many can press w/  mainly Tris.
 These all good for adding triceps.

Biceps? I'm like'n seated DB curls lately, slight incline sometimes.
Cheat curls w/ BB also.
Jumpstretch bands give a searing finish pump for Bi's & Tris (Band Pressdowns)


Cool.  It's always a good thing to try different stuff out.   8)

Personally, I think I'm switching things up for a few months and focusing on powerlifting...which means little to no additional arm work for a while.

Title: Re: ARM TRAINING
Post by: Luv2Hurt on September 05, 2007, 04:53:11 AM
Tendinitis?

Supinating curls is a invite for that to me. I'm better off just curling.
Try a fat Barbell if you can get hold of one... use for curls and bench press for a time.
It will show on arms and forarms.
When you go back to the Olympic bar, it then feels like a toothpick. It will crank up your benchpress.
Great for the grip, will come in handy for dealing w/ rude guys for you.  ;D  a Couple broken fingers for you Mr....

Yeah not too many gyms have those fat bars, wish they did cause it is true what you say.  A hardcore PL gym would probally be the place to find one, first you gotta FIND a hardcore PL gym  :-\  There was one I trained at while in Lacrosse Wisc. once called The Gym, that place was very cool man they had all the PL stuff big time!  Metal music Blarring, tons of old school stuff like chains, monolifts (2) chalk bins out in the open for the members, that cool lever to jack the bar up on the ground for loading plates on the DL. huge platform in the middle of the gym like an alter or something.  was a cool place. 5 bucks a day to train and the guy gave me free pass for the next day.  I bet they had those big ass bars in there.
Title: Re: ARM TRAINING
Post by: trab on September 05, 2007, 09:38:54 AM
FAT BAR? - I took a piece of 2 1/2" heavy metal conduit (The pipe the Elect wires run down into the house).

Then, One of the econo Barrbells w/ spin on end locks slides right inside that pipe.
Next, Screw down the ends in a vise real tight w/ pipe wrench & check each work out
  (Dont want it to losten and bar drop 1" inside that fat pipe).

Presto - Fat bar for almost $0.oo.  Ive put like 220lb + a couple 35lb chain sets  on each side.
It seem plenty solid for that, but getting close to as much as I'd trust on it.

I'll have to break down and buy a real one if I stay injury free and healthy for a few months...
Title: Re: ARM TRAINING
Post by: Luv2Hurt on September 05, 2007, 02:56:48 PM
FAT BAR? - I took a piece of 2 1/2" heavy metal conduit (The pipe the Elect wires run down into the house).

Then, One of the econo Barrbells w/ spin on end locks slides right inside that pipe.
Next, Screw down the ends in a vise real tight w/ pipe wrench & check each work out
  (Dont want it to losten and bar drop 1" inside that fat pipe).

Presto - Fat bar for almost $0.oo.  Ive put like 220lb + a couple 35lb chain sets  on each side.
It seem plenty solid for that, but getting close to as much as I'd trust on it.

I'll have to break down and buy a real one if I stay injury free and healthy for a few months...

Your a regular Mcguyver bro  :D  I wonder if even just some PCV pipe the same OD as the bar with a slit along the length could slip over the bar and work?  or something like that or maybe even some rubber hose, like radiator hose.
Title: Re: ARM TRAINING
Post by: trab on September 05, 2007, 07:52:55 PM
Your a regular Mcguyver bro  :D  I wonder if even just some PCV pipe the same OD as the bar with a slit along the length could slip over the bar and work?  or something like that or maybe even some rubber hose, like radiator hose.

I think it best to clamp it real tight, esp when benching. Curls for arms would be fine W/ strong PVC, but when I got that bar over me, I want it solid.

You can find that metal conduit in Home Depot & Menards, Lowes...

I think about 220lbs + chain is all I'd go on a cheap barrbell. Im running out of room at taht point anyway.
The chain is not 100% load except when it up, it deloads on the chest..

Fat bar will increase your grip fast. Good if you deadlift. Squeeze it like yur tryin' to kill it. That will also up yur bench.
Squeeze and "stretch" it like its rubber and yur tryin' to pull it apart.
Title: Re: ARM TRAINING
Post by: ripitupbaby on September 06, 2007, 04:51:44 AM
FAT BAR? - I took a piece of 2 1/2" heavy metal conduit (The pipe the Elect wires run down into the house).

Then, One of the econo Barrbells w/ spin on end locks slides right inside that pipe.
Next, Screw down the ends in a vise real tight w/ pipe wrench & check each work out
  (Dont want it to losten and bar drop 1" inside that fat pipe).

Presto - Fat bar for almost $0.oo.  Ive put like 220lb + a couple 35lb chain sets  on each side.
It seem plenty solid for that, but getting close to as much as I'd trust on it.

I'll have to break down and buy a real one if I stay injury free and healthy for a few months...



This is classic.  Good shit right there.   8)

Title: Re: ARM TRAINING
Post by: Butterbean on September 06, 2007, 12:50:09 PM

I did the alternating bi-tri workout last week and it definitely kicked my ass.  I did supersets (one bi exercise and one tri exercise), so I was able to cover alot of ground in one workout.  My arms got painfully pumped, and my biceps were sore at the insertions, which is unusual for me (my biceps hardly ever get sore).

THREE SUPERSETS EACH:
---Dumbell bicep curls, straight bar tricep cable push downs
---EZ Bar bicep curls with close grip, rope tricep push downs
---Seated incline dumbell curls with arms turned outward (for inner head), weight-assisted tricep dips
---Preacher curl bicep machine, tricep machine
---2 sets each of dumbell hammer curl drop sets, and reverse grip one handed tricep cable pushdowns


OUCH!    ;D



We did this today  Thanks  ...I think :)
Title: Re: ARM TRAINING
Post by: ripitupbaby on September 06, 2007, 01:10:56 PM
We did this today  Thanks  ...I think :)


THAT is still one of the best arm workouts I have done, as per Luv's advice to alternate between bis and tris.   8)

I still owe you a track workout stella, I have not forgotten!  I will be inspired to put a good one together once I get my new sneakers, which I have said I would do for about a month now. 

Title: Re: ARM TRAINING
Post by: Luv2Hurt on October 12, 2007, 02:15:30 PM
Hit arms yesterday and it was feeling good.  For some reason the biceps were feeling strong.  Love the vascularity I get at this point and shows up nice on arm day.

I did straight bar culs with the olympic bar 5 sets trying to stay strict and keep tension on the bis.  pretty sure a while ago I did something to my left bi cause it hurts on this movement at full contraction in the elbow area when I go a bit heavier.  So my training has been DBs mostly and overall lighter.  But did 5 sets the last 2 with 105lbs for 12 strict reps.

Triceps push downs with a straight bar:  These pumped up my tris good, i try to really keep my shoulders out the my tri work as I see so many people using lots of shoulders for this muscle.  I really need to think about the excersise to get connected on these.  4x10-12 not sure of the weights I used but did a drop set at the end.

Hammer strength peacher curls supersetted with hammer seated push down  4X12  was liking this!

Standing DB curls supersetted with standing french press, which I did in the smith machine.  Was going to do close grip benches with the curls but all the benches were being used  >:( so I tryed something new and they felt cool.  Have not done the standing FP in a long time and was a nice change of pace  :)

Was very happy with the work out and was one of the better arm workouts I had in a while.

Then it was calves, cardio, tanning, cooking food, taking care of dog, showering, taking suplements, getting lunches ready for tommorow, fielding phone calls.......aahhgggg!! never ends!!
Title: Re: ARM TRAINING
Post by: davidpaul on October 12, 2007, 04:20:00 PM
not long now bro keep doing your thing man.
Title: Re: ARM TRAINING
Post by: ripitupbaby on October 13, 2007, 08:09:17 PM
Stay strong Luv baby.... :-*

Do you find french presses tough on the elbows?

Title: Re: ARM TRAINING
Post by: Luv2Hurt on October 13, 2007, 08:48:18 PM
Stay strong Luv baby.... :-*

Do you find french presses tough on the elbows?



Thanks DP and Rip  :)  Iam hanging in there pretty well, 2 weeks!!

You know sometimes my elbows hurt for periods of time and others Im fine.  Right now they are feeling pretty good, but my left shoulder is hurting some.  Did DB presses today and shoulder hurt some and is sore right now, I should ice it duhh! I think its the bicipital tendon, which is a common source of shoulder pain. 

The lying french press AKA skull chrushers does at times cause discomfort in my left elbow.  My poor little left side trying to keep pace with my dominate right  ;)

The standing french press in the smith was a cool variation.  someone much taller than me could not do them in there.  I just did it in there cause I had a nice space to superset the DB curls also.  But it was pretty cool and I think I might do them like that from time to time.  But no real elbow pain on them.....that time  8)
Title: Re: ARM TRAINING
Post by: ripitupbaby on October 15, 2007, 09:16:55 AM
Thanks DP and Rip  :)  Iam hanging in there pretty well, 2 weeks!!

You know sometimes my elbows hurt for periods of time and others Im fine.  Right now they are feeling pretty good, but my left shoulder is hurting some.  Did DB presses today and shoulder hurt some and is sore right now, I should ice it duhh! I think its the bicipital tendon, which is a common source of shoulder pain. 

The lying french press AKA skull chrushers does at times cause discomfort in my left elbow.  My poor little left side trying to keep pace with my dominate right  ;)

The standing french press in the smith was a cool variation.  someone much taller than me could not do them in there.  I just did it in there cause I had a nice space to superset the DB curls also.  But it was pretty cool and I think I might do them like that from time to time.  But no real elbow pain on them.....that time  8)


French press is something that usually bothers my elbows, so I don't do it much and have eliminated it altogether for the time being.
I DO love to do skull crushers, but I have eliminated those for the time being as well.  I never actually thought of those as lying french presses, but I guess they are lol.
I am down to basic cable work for triceps...and of course the bench press work, including a lot of close grips.

Hang in there and be good to yourself during these final days!!  No need for injuries right now!
 :)
Title: Re: ARM TRAINING
Post by: The Squadfather on October 15, 2007, 09:22:12 AM
stretch movements like extensions take too long to recover from if you're going for pure benching power, they're fine for a bodybuilding program but you're better off just sticking to the close grips and very heavy pushdowns either leaning into the bar or with your elbows at your sides for powerlfting.
Title: Re: ARM TRAINING
Post by: ripitupbaby on October 15, 2007, 09:31:17 AM
stretch movements like extensions take too long to recover from if you're going for pure benching power, they're fine for a bodybuilding program but you're better off just sticking to the close grips and very heavy pushdowns either leaning into the bar or with your elbows at your sides for powerlfting.


Yeah, I am doing cable pushdowns, mostly with the rope to get full ROM, and pretty heavy.  That's about it, along with the close grips.  The negatives I do (bench press) also burn up my triceps.
I am already feeling like my triceps are getting MUCH stronger, after just 4 weeks of this kind of training.   8)

Title: Re: ARM TRAINING
Post by: The Squadfather on October 15, 2007, 09:39:16 AM

Yeah, I am doing cable pushdowns, mostly with the rope to get full ROM, and pretty heavy.  That's about it, along with the close grips.  The negatives I do (bench press) also burn up my triceps.
I am already feeling like my triceps are getting MUCH stronger, after just 4 weeks of this kind of training.   8)


use the small angled bar on pushdowns and lean into the cable to handle some heavy weights, they carry over to your bench press much, much more that way, another thing you could do is pull a bench into a power rack and do some very heavy partial close grips or do some heavy board presses.
Title: Re: ARM TRAINING
Post by: ripitupbaby on October 15, 2007, 09:47:04 AM
use the small angled bar on pushdowns and lean into the cable to handle some heavy weights, they carry over to your bench press much, much more that way, another thing you could do is pull a bench into a power rack and do some very heavy partial close grips or do some heavy board presses.


No power rack at my gym unfortunately.  But my second chest workout each week is focused on triceps, and I am going to start heavy board presses during this workout probably next week.  I'm gonna try to break that shirt in!   :D
Title: Re: ARM TRAINING
Post by: The Squadfather on October 15, 2007, 09:47:16 AM
it can take some getting used to going from training triceps like a bodybuilder to training triceps like a powerlifter, training tri's like a powerlifter means pushing the weight in a straight line on extensions and pushdowns as opposed to an pushing the weight in an arc motion like a bodybuilder, most powerlifters extensions look like half presses half extensions.