Getbig.com: American Bodybuilding, Fitness and Figure

Getbig Bodybuilding Boards => Steroids Info & Hardcore => Topic started by: gunnz on March 19, 2008, 03:50:19 PM

Title: Needle size??
Post by: gunnz on March 19, 2008, 03:50:19 PM
I currently use a 25 gauge for 75 mg winny and a 23 gauge for 500 mg test.   Are all 25 gauge 1/2 inch and 23 gauge 1 inch?  How do you decipher what type of needle to use?
Title: Re: Needle size??
Post by: Emmortal on March 19, 2008, 04:04:26 PM
You can get 25guages in 1-1.5" just depends on what you ordered.  You use the needle that's most comfortable to you and that is long enough to get past the fat into your muscle.
Title: Re: Needle size??
Post by: The Squadfather on March 19, 2008, 04:09:36 PM
you're running Winstrol through a 25 gauge needle? Winny is water based isn't it? doesn't seem like the crystals would pass through a needle that small, oil based products are best with a 22 or 23 gauge and the length of the needle should be based on how thick the muscle you're putting it in is, if it's a typical glute inj. use a 1 and a half but if you're going into the delt, bicep or calf use a 1 inch.
Title: Re: Needle size??
Post by: Rimbaud on March 19, 2008, 04:51:55 PM
I've found a 23 guage is a pretty good all around needle to use.
Title: Re: Needle size??
Post by: The Squadfather on March 19, 2008, 05:33:18 PM
i knew a crazy SOB who used to run Suspension through a 20 and sometimes even a fucking 19 in the DELT, crazy bastard.
Title: Re: Needle size??
Post by: Big_Tymer on March 19, 2008, 06:02:32 PM
i knew a crazy SOB who used to run Suspension through a 20 and sometimes even a fucking 19 in the DELT, crazy bastard.

:o


Title: Re: Needle size??
Post by: rawdawg on March 19, 2008, 07:36:47 PM
get rid of the needle for the Winny and just drink it save the injection
Title: Re: Needle size??
Post by: busyB on March 19, 2008, 07:39:17 PM
I've found a 23 guage is a pretty good all around needle to use.

Bingo!  :)

thats all I do as well, A 23g 1.5" for any inj!

Double Bingo!  :) :)
Title: Re: Needle size??
Post by: Fulgorre on March 19, 2008, 09:52:49 PM
Get some 18 for drawing up out of your stealth satchets.... ::)
Title: Re: Needle size??
Post by: candidizzle on March 19, 2008, 09:55:13 PM
Get some 18 for drawing up out of your stealth satchets.... ::)
what do you mean?

Title: Re: Needle size??
Post by: Rimbaud on March 20, 2008, 06:05:43 AM
what do you mean?

Say you've got a 10ml sachet. You'll use a large syringe with an 18 guage needle & then draw all the liquid out. You'd then put it into a multidose vial & use accordingly.
Title: Re: Needle size??
Post by: duncanlukas on March 20, 2008, 07:38:12 AM
u cant go wrong with a 23x 1 inch syringe/needle
Title: Re: Needle size??
Post by: XFACTOR on March 20, 2008, 09:55:40 AM
you're running Winstrol through a 25 gauge needle? Winny is water based isn't it? doesn't seem like the crystals would pass through a needle that small, oil based products are best with a 22 or 23 gauge and the length of the needle should be based on how thick the muscle you're putting it in is, if it's a typical glute inj. use a 1 and a half but if you're going into the delt, bicep or calf use a 1 inch.

I wish someone would have told me this a few years ago when I did it.  I would stick the needle in and push hard as hell, nothing would come out.  I tried three times and couldn't get the shit out.  I ended up giving the winny away and not using it.
Title: Re: Needle size??
Post by: The Squadfather on March 20, 2008, 12:58:09 PM
I wish someone would have told me this a few years ago when I did it.  I would stick the needle in and push hard as hell, nothing would come out.  I tried three times and couldn't get the shit out.  I ended up giving the winny away and not using it.
yep, it's always best to just endure the pain for 20 seconds or so and run 2-3cc's of water based product through a 20 or 21 gauge, it passes through so much quicker than with a small needle.