Getbig.com: American Bodybuilding, Fitness and Figure
Getbig Main Boards => Gossip & Opinions => Topic started by: Tedim on July 29, 2013, 05:54:05 PM
-
We call it the "Atlanta Traffic Plow".... ;D
Total weight approx....400 lbs (front bumper)
-
What is this nonsense
-
What is this nonsense
Big fuckin bumper on my big fuckin Mack RD....that's what ;D
-
Nice
-
Nice
TY........we are going to do dual 8" dog eared exhausts next and a snorkel air intake.
-
We call it the "Atlanta Traffic Plow".... ;D
Total weight approx....400 lbs (front bumper)
You realize the license plate is visible, yes ?
-
You realize the license plate is visible, yes ?
Fixed....Good catch, although I'm sure if someone wants to find out about me, they will. Nice thing about not having to hide or lie about self.
-
-
Terrible IMO.
-
Big fuckin bumper on my big fuckin Mack RD....that's what ;D
I have three Mack RD690's. Do you haul roll off containers?
-
I have three Mack RD690's. Do you haul roll off containers?
We do...we have about 70 cans 10, 15, 20, 30 and 40 yards we have two RD's a Pete and and International that we will be selling and getting an RD....and we're fabricating a roll off trailer.
Looking to get more into service/repair and fabrication.
You dumptrucks?
-
someppl would use this to ram into jewelry shop windows and lend some stuff out ;D
Windows? HA I can go through a block wall.....running 315 11R22.5 on this beast "waste haulers" 270 tread width
-
Congrats Tedim
-
Congrats Tedim
I'm really enjoying this business....it's not my main business but I must admit I do like this one, even though I'm not very active in it. The fabrication is the hook for me......plus I'm still a newb to this industry.
-
We do...we have about 70 cans 10, 15, 20, 30 and 40 yards we have two RD's a Pete and and International that we will be selling and getting an RD....and we're fabricating a roll off trailer.
Looking to get more into service/repair and fabrication.
You dumptrucks?
No, but they were. I pulled the beds off and put water tanks on them. I like Mack's, especially these ones. They have the 5 speed with the low settings for 1,2, and reverse. If you're on a job site, and need to haul the 40,000 pound load up a hill, they'll do it no problem too. I just took one on an eight hour trip, turned around two hours later and drove right back. I thought about getting a Granite, but for what I use them for, I don't need a pretty truck. I have an L8000 and an international 4700 as well, nothing as good as the Mack's though. Do you do strictly roll offs, or demo too?
-
In before someone Photoshops Basile in a cage and puts it were your grill is.lol
-
What do you need a 400lb bumper for? You're not going to be ramming stuff, it just hurts your gas mileage? ???
-
No, but they were. I pulled the beds off and put water tanks on them. I like Mack's, especially these ones. They have the 5 speed with the low settings for 1,2, and reverse. If you're on a job site, and need to haul the 40,000 pound load up a hill, they'll do it new liable too. I just took one on an eight hour trip, turned around two hours later and drove right back. I thought about getting a Granite, but for what I use them for, I don't need a pretty truck. I have an L8000 and an international 4700 as well, nothing as good as the Mack's though. Do you do strictly roll offs, or demo too?
Our international is on a contract site (processing plant 4-5 cans per day)......the rest do temp work. We sub demo work and just do roll off. We are looking to add a couple of day tractors and do dump trailer work.
But long term fabrication and full service bays....we can do in frame engine work on Mack's now my main mech is Mack certified house mouse from PA where I grew up. We're still small but growing couple more trucks some more contract work and we'll move into YELLOW METAL ;D
-
What do you need a 400lb bumper for? You're not going to be ramming stuff, it just hurts your gas mileage? ???
We are in landfills all day, sick of buying 1500. Hoods.....we short haul so gas isn't an issue...plus they're Mack's so gas mileage hahahahahahahahahaabanah haab
-
And we love RD's won't buy granite Mack's for what we do they're perfect.
-
We are in landfills all day, sick of buying 1500. Hoods.....we short haul so gas isn't an issue...plus they're Mack's so gas mileage hahahahahahahahahaabanah haab
okay, I see...
fuck you trucker....
-
Our international is on a contract site (processing plant 4-5 cans per day)......the rest do temp work. We sub demo work and just do roll off. We are looking to add a couple of day tractors and do dump trailer work.
But long term fabrication and full service bays....we can do in frame engine work on Mack's now my main mech is Mack certified house mouse from PA where I grew up. We're still small but growing couple more trucks some more contract work and we'll move into YELLOW METAL ;D
I had to fabricate all of my trucks. We had to add about seven feet to the ends of each one. We just got C channel and welded it, and reinforced it with plates. Had to get new light kits and what not too after we lengthened them. I thought about converting one of my tanks to a hook and go and buying a few cans, but then said fuck it. Where are you located, you said PA, are you anywhere near Marcellus Shale?
-
I had to fabricate all of my trucks. We had to add about seven feet to the ends of each one. We just got C channel and welded it, and reinforced it with plates. Had to get new light kits and what not too after we lengthened them. I thought about converting one of my tanks to a hook and go and buying a few cans, but then said fuck it. Where are you located, you said PA, are you anywhere near Marcellus Shale?
No I'm in North Georgia, and all mine are cable pull.
Would like to look into wrecker business but who has 350K for a truck?
-
Post some pics....
So the rest of the twinks around here see what real trucks look like.....
-
I think it's funny when some douchebag trucker expects you to back up when they're making a turn, or not go around them when they're in the left lane making a right hand turn. They act like they'll hit you, but they back down at the last minute. Fuck them
-
Post some pics....
So the rest of the twinks around here see what real trucks look like.....
Can't. Then getbig would know how I make my millions. ;D
-
We call it the "Atlanta Traffic Plow".... ;D
Total weight approx....400 lbs (front bumper)
Looks good to ram something with
-
Guess which getbiggers these are...
-
I think it's funny when some douchebag trucker expects you to back up when they're making a turn, or not go around them when they're in the left lane making a right hand turn. They act like they'll hit you, but they back down at the last minute. Fuck them
It's not the size...... YES, YES it is the size. :D
-
It's not the size...... YES, YES it is the size. :D
I have to admit, if I saw that 400lb bumper hanging over my car I'd shit myself and throw it in reverse!!
-
-
;D
-
Don't forget the movie Duel.
(http://upload.wikimedia.org/wikipedia/en/thumb/d/d4/Duel_poster.jpg/220px-Duel_poster.jpg)
-
:o
-
Don't forget the movie Duel.
(http://upload.wikimedia.org/wikipedia/en/thumb/d/d4/Duel_poster.jpg/220px-Duel_poster.jpg)
Big Louie's alternate ending
[ Invalid YouTube link ]