25g

[pugalist666]

any one ever used 25guage needle to inject test e ? pharmasave was all out of 23 and 24 gauge just wondering if its going to work or will i have to use the 22'S

[4thAD]

25g should be fine for injection. You will might want a larger pin to draw as a 25g pin will take an awful long time depending on how thick the test is.

[pugalist666]

25g should be fine for injection. You will might want a larger pin to draw as a 25g pin will take an awful long time depending on how thick the test is.

already got my 20g ready for the draw 

[4thAD]

then you are set!

[shrek]

any one ever used 25guage needle to inject test e ? pharmasave was all out of 23 and 24 gauge just wondering if its going to work or will i have to use the 22'S

i use the 25g for test e tren and even sust i found the easiest way is to get a 6ml plunge if you are drawing 2mls and put the cap on the needle and warm up the oil under the faucit

[CAPTAIN INSANO]

25's suck too thin..

I go 23..

[pugalist666]

25's suck too thin..

I go 23..

not an option for me . 22 or 25 is all pharmasave sells

[R.A.M.]

25's suck too thin..

I go 23..

yeah i use 23 for everything

[4thAD]

I use 23's also, but a 25 is sufficient, and forces somebody new to injecting, to inject nice and slow. Drawing with a 25 forget about it.

[pugalist666]

I use 23's also, but a 25 is sufficient, and forces somebody new to injecting, to inject nice and slow. Drawing with a 25 forget about it.

they worked perfectly this morning , went in like a breeze , heated oil up under tap  no problem pushing down the plunger , also zero leakage compared to 22's

[4thAD]

they worked perfectly this morning , went in like a breeze , heated oil up under tap  no problem pushing down the plunger , also zero leakage compared to 22's

Good to hear. What ever works is key.

[dustin]

I used to use 23g for large muscles and 25g for small... bought so many pins I just started doing 25g for everything.

I don't use shitty gear so it goes through just fine. Still pull with a larger gauge but don't have to heat my oil, do 10 hail Marys and sacrifice a goat and two chickens just to draw my gear.

[shrek]

I used to use 23g for large muscles and 25g for small... bought so many pins I just started doing 25g for everything.

I don't use shitty gear so it goes through just fine. Still pull with a larger gauge but don't have to heat my oil, do 10 hail Marys and sacrifice a goat and two chickens just to draw my gear.

dude i have no idea what you just said

[Nasty Nate]

I've used 25g before but prefer 23g... I draw with 18g.

[brent2741]

ive used 1 cc insulin pins and they work great, with much less scaring and lumping