Injection site "leaking"

[beverast]

Hey there, I've got this problem:

When I remove the pin after injecting my left gluteus medius, there's always a bit of fluid leaking from the site. It looks suspiciously like the oil I just injected.
It happened every time I injected this site for the last 2 weeks (3 injections), and only there. I've hit that muscle many times before without any problems.
Can somebody tell me what is going on here?

[ChevChelios]

inject deeper,take a little time before getting out with the needle,otherwise it's not a great issue if little oil comes back...

[beverast]

I inject with a 1.25" pin and wait 20-30s before removing the needle after injecting.

[Luolamies]

I inject with a 1.25" pin and wait 20-30s before removing the needle after injecting.

Try the ''z-track method'' it will stop the leaking.

Probably a low dosage problem.

Up the dosage.

And have you ever used steroids? Thought so, don't give advice on something you don't have a clue about...

[trapz101]

Try the ''z-track method'' it will stop the leaking.

And have you ever used steroids? Thought so, don't give advice on something you don't have a clue about...

with glutes,the z track method is impossible...maybe should wait longer before pull out the pin...give it 50-60 secs..

[beverast]

Thanks for your input so far.
I'll try to wait before pulling out next time and see what happens.

[El Diablo Blanco]

The deal is scar tissue has formed there, so the fluid being injected is not getting absorbed into the muscles as quickly and is leaking out.  you might want to ease up on the glutes and try another site for a bit and try to work the scar tissue out.

[Marlo Stanfield]

Hey there, I've got this problem:

When I remove the pin after injecting my left gluteus medius, there's always a bit of fluid leaking from the site. It looks suspiciously like the oil I just injected.
It happened every time I injected this site for the last 2 weeks (3 injections), and only there. I've hit that muscle many times before without any problems.
Can somebody tell me what is going on here?

what do you mean exactly by "LEAKING" ? 

do you see the oil coming out of the injection spot and running down your thigh? or do you just see some of the oil SURROUNDING the injection spot?

remember, when your trying to remove all the air and bubble out of the syringe, you will inevevitable push some oil out the needle and have it run down the needle .. some folks say that this is good because it will act as a lubricant... So some of that oil might be the oil that was ON THE NEEDLE, and once you push it in the skin, the skin holds all those oils from entering your body, and they will just pile on the sides of the injection spot... does the visual make sense?

You can try to push the air out the syringe, and then wipe the needle with alcohol swap, wait till it dries and then inject.. see if that fixes it

[Overload]

Up the dosage?

You're not funny.

Contribute or GTFO.

[Luolamies]

Up the dosage?

For all you know he is already juiced to the gills and if you give this kind of ''funny advise'' you might even harm him.

Food for thought...

[Marlo Stanfield]

You're not funny.

Contribute or GTFO.

Hey mods,
any chance you can ban this fucker from the steroids boards? he gives terrible advice, and you mods of all people know how some young bodybuilders are so impressionable, and they will just take peoples advice without thinking twice... all this fucker does is say up the dosage, and it can be a pretty fucking bad advice in some cases... here is 2 mins worth of work i put into it, not sure if you wanna send it to ron and have him banned. i'll PM you guys individually as well

[Luolamies]

x2!

Also good work Marlo.

[randy841]

I only inject the glutes every 4-5 days - have done so for nearly 8 months now, before for 18 weeks on 1st cycle. Happened to me once where all of the oil mixed with blood literally just shot out upon pulling out needle -- on to the floor and my ankle. It was a mistake on my part, i rushed.

Inject slowly, then wait at least 30 seconds before pulling out. Afterwards, apply pressure for 30-60 seconds.

You can also try the Z method, it works.