Getbig Bodybuilding, Figure and Fitness Forums
Getbig Misc Discussion Boards => Pet Board => Topic started by: ~flower~ on March 31, 2007, 11:20:45 AM
-
Any ideas on how to Tad proof the drivegate? He can squeeze out the space where the 2 connect.
My lil baby tater who at work doesn't even let me go to the bathroom without going with me was just down the street! :o Taking a little jaunt.
Chicken wire attached to one gate so that when it shuts it extends out over the other one?
-
chicken wire will work, pretty inexpensive too. or you can stick a giant funnel around his head so he couldn't squeeze through the opening
-
Is it a yard where you go through every day or can you do something like this?
-
It's the 2 gates that go across the driveway that I have to open and shut to get my car out. So there is a space where they latch that he squeezes through.
Chicken wire is probably the cheapest and easiest, will look like crap though. I was putting a garbage can in front of it, but it can blow over in wind, and that looks crappy too. :P It has to be stiff enough too because it will only be attached to one gate and have to overlap to the over one to cover the hole.
I just can't believe he has a fit if I go down the hall at work, he has to know where I am at all times, yet he will go down the driveway and down the street by himself!! >:(
Like this, (but not as tall)
(http://www.fenceenterprises.com/graphics/chain_link/cage.jpg)
-
Go here.. http://www.lowes.com/lowes/lkn?action=howTo&p=LawnGarden/PetFnce.html&rn=RightNavFiles/rightNavHowTo
It was all i could find to give you a solution to your problem instead of that crappy looking chicken fence... ;)
-
You can measure the gap between to the fence & go down to Home Depot (or whatever) & pick up a pvc pipe long enough & wide enough to fill in the gap.
Then, zip tie it to one end of the fence.
It should close the gap enough without looking too bad
-
that has given me a few ideas - thanks.
-
Why not just call a contractor and have them build you a new Tad-proof gate?
-
Why not just call a contractor and have them build you a new Tad-proof gate?
ok you = daddy warbucks
me = orphan amy
:)
-
ok you = daddy warbucks
me = orphan amy
:)
How expensive could a stoopid gate possibly be? It's not like you're asking for it to be gold-plated or anything. ::)
-
How expensive could a stoopid gate possibly be? It's not like you're asking for it to be gold-plated or anything. ::)
I have the gates. We are talking about a 6 1/2 pound dog. He can get through a small space. There has to be a small space between the gates because you have the drop rod and locking clasp in the middle of them. I don't chain them together like an industrial site. ::) And the bottom of the gates don't scrape across the pavement so where they meet he can get through at the bottom.
Like in the space between these U's, he squeezes through.
UU
^
Little shit did that when I caught him on the sidewalk, ran up the driveway and squeezed his fuzzy ass back through. >:(
-
well my idea would still work....just move it on the bottom
-
I have the gates. We are talking about a 6 1/2 pound dog. He can get through a small space. There has to be a small space between the gates because you have the drop rod and locking clasp in the middle of them. I don't chain them together like an industrial site. ::) And the bottom of the gates don't scrape across the pavement so where they meet he can get through at the bottom.
Like in the space between these U's, he squeezes through.
UU
^
Little shit did that when I caught him on the sidewalk, ran up the driveway and squeezed his fuzzy ass back through. >:(
I'm sure one could be engineered that didn't have a gap in the middle. How 'bout a single gate that is mechanically operated, rather than a double gate that splits in the middle?
-
Do one like this:
-
well my idea would still work....just move it on the bottom
I think it would it would, I don't think I would have to zip tie it because I would just cut a slit in it. I have some black tubing for the ferrets, (2) 6ft lengths, I could cut a foot section off of. With a slit I think it would stay on by itself and I could slide it up and down when I opened the gate. That would cut the space in 1/2 and Tad should be foiled!!
Do one like this:
::) I would rather stick a piece of plastic on there for $2, tyvm.
-
I would rather stick a piece of plastic on there for $2, tyvm.
Yeah, but it'll probably look st00pid! ::)
-
Yeah, but it'll probably look st00pid! ::)
I didn't even saw off any fingers!! :D
-
I didn't even saw off any fingers!! :D
Chain-link??
How "high crime area" chic of you. ::)
-
Chain-link??
How "high crime area" chic of you. ::)
There is wood fencing around the rest of it now. I showed a pic of a chain link and said "like this, but not as tall" duh
Now it is chain link and plastic tubing ;D
-
looks like that will work
glad to be of help
-
There is wood fencing around the rest of it now. I showed a pic of a chain link and said "like this, but not as tall" duh
Now it is chain link and plastic tubing ;D
I like my idea better:
EFIS or stucco-covered cement block fence, with decorative iron gate. It would be waaaaayy less "white trash" than the whole wood/chain-link/plastic combo.
(http://www.getbig.com/boards/index.php?action=dlattach;topic=138214.0;attach=155103;image)
-
Goatboy.....nobody wants to spend a million dollars on a gate
-
Goatboy.....nobody wants to spend a million dollars on a gate
That wouldn't cost anywhere near a million dollars. ::)
Maybe 10k or so I'm guessing?
-
That wouldn't cost anywhere near a million dollars. ::)
Maybe 10k or so I'm guessing?
do you know what 10K for a Rochesterian is?
-
do you know what 10K for a Rochesterian is?
Lunch money?
-
That wouldn't cost anywhere near a million dollars. ::)
Maybe 10k or so I'm guessing?
Yea, I will spend 10k on a gate ::)
-
Yea, I will spend 10k on a gate ::)
Well, to be fair, that $10k would probably include the opening mechanism, as well as the fencing on either side and maybe a couple of coach lights as well! ;D
-
Well, to be fair, that $10k would probably include the opening mechanism, as well as the fencing on either side and maybe a couple of coach lights as well! ;D
someone would probably steal it ::)
-
someone would probably steal it ::)
Do you live in the hood?
-
Do you live in the hood?
no, that's 2 block over. ;D
-
I still say my idea is the best... >:(
-
I am not putting a collar on him. :P