Getbig.com: American Bodybuilding, Fitness and Figure

Getbig Bodybuilding Boards => Steroids Info & Hardcore => Topic started by: Figo on September 16, 2009, 06:11:07 AM

Title: Mixing compounds
Post by: Figo on September 16, 2009, 06:11:07 AM

Excuse my ignorance here, but always wondered... :-[

How does one extract 2 or more compounds into one syringe without mixing them or messing it up? ???

Title: Re: Mixing compounds
Post by: Tats on September 16, 2009, 06:27:14 AM

Having them mix in the syringe is no issue.  ???

Title: Re: Mixing compounds
Post by: dyslexic on September 16, 2009, 06:55:30 AM

You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

Title: Re: Mixing compounds
Post by: Figo on September 16, 2009, 07:15:34 AM

Quote from: dyslexic on September 16, 2009, 06:55:30 AM

You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

Do you use the same drawing pin for all ? , is how I should have phrased question.

Title: Re: Mixing compounds
Post by: tstmaniac on September 16, 2009, 07:39:56 AM

Quote from: dyslexic on September 16, 2009, 06:55:30 AM

You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

I have always mixed oils and water based without any issues...no complaints here

Title: Re: Mixing compounds
Post by: benchmstr on September 16, 2009, 09:30:44 AM

Quote from: Figo on September 16, 2009, 07:15:34 AM

Do you use the same drawing pin for all ? , is how I should have phrased question.

yes, use the same pin.

bench

Title: Re: Mixing compounds
Post by: Figo on September 16, 2009, 12:47:16 PM

thx guys

Title: Re: Mixing compounds
Post by: Luolamies on September 16, 2009, 11:17:58 PM

I draw with 21 g, inject with 23 g. When the tip of the pin hits the bottom of the ampoule it dulls a little bit and when you use vials this is still good/safe practice.

Title: Re: Mixing compounds
Post by: 4thAD on September 17, 2009, 09:48:33 AM

water and oil can be mixed. probably not the prettiest injection, but no problem.