Author Topic: Amp to Vial Transfer (Read 4826 times)

bugsy187 · « **on:** December 29, 2008, 11:21:37 AM »

Hey bro's I am planning on transfering my test E..from the schering amps to a vial..for the convinance of use. Is that ok to do...would that mess up the chemical balance. I figure since its all test e..it should be ok...but just wanted some thoughts on it. Thanks!

4thAD · « **Reply #1 on:** December 29, 2008, 11:48:13 AM »

It will work and the hormone will be OK, the only problem I see is possible contamination. Every time you touch the sterile oils you have a greater chance of contamination. I personally would leave it in the amps. Amps are so convenient to use, snap draw and poke. kinda like rice krispies.

liquid_c · « **Reply #2 on:** December 29, 2008, 11:50:27 AM »

Leave it in the amps. That's one purpose for the amps, the are one use only and help prevent contamination.

bugsy187 · « **Reply #3 on:** December 29, 2008, 11:56:11 AM »

Thanks Buds....! I will leave em in the amps...good I asked!

iron_dawg · « **Reply #4 on:** December 29, 2008, 03:30:47 PM »

not a very good idea bud...keep them in the amps don't have to worry about swabbing the tops of the vials...

Luv2Hurt · « **Reply #5 on:** December 30, 2008, 04:31:09 AM »

Agree with the other posters, leave in the amps.

bugsy187 · « **Reply #6 on:** December 30, 2008, 12:06:24 PM »

Leave em in the amp it is....sometimes I end up breaking the amp. are there any special techniques for opening them! Thanks Buds! Iam switching over to HG gear...so I will have to get useto it!

jtsunami · « **Reply #7 on:** December 30, 2008, 12:22:24 PM »

Quote from: bugsy187 on December 30, 2008, 12:06:24 PM

Leave em in the amp it is....sometimes I end up breaking the amp. are there any special techniques for opening them! Thanks Buds! Iam switching over to HG gear...so I will have to get useto it!

yeah goto the hardware store and get a glass file, works great, file down one spot on the ring and break it there.

jt

bugsy187 · « **Reply #8 on:** December 30, 2008, 12:40:12 PM »

Thanks...sounds great!

iron_dawg · « **Reply #9 on:** December 30, 2008, 01:25:02 PM »

jtsunami · « **Reply #10 on:** December 30, 2008, 01:33:49 PM »

not really a good demonstration imo, a glass file and file away at a certain spot works much better.

jt

iron_dawg · « **Reply #11 on:** December 30, 2008, 01:38:32 PM »

Quote from: jtsunami on December 30, 2008, 01:33:49 PM

not really a good demonstration imo, a glass file and file away at a certain spot works much better.

jt

just trying to give him a idea...I just use a pen cap and towel...no filing just alittle gentle force

jtsunami · « **Reply #12 on:** December 30, 2008, 01:39:40 PM »

hmm never tried a pen cap sounds like a very intuitive idea, are you Arab?

jt

iron_dawg · « **Reply #13 on:** December 30, 2008, 01:41:14 PM »

Quote from: jtsunami on December 30, 2008, 01:39:40 PM

hmm never tried a pen cap sounds like a very intuitive idea, are you Arab?

jt

yes I wrap the towel around my head when I do it...how did you know

MuscleMcMannus · « **Reply #14 on:** December 30, 2008, 01:41:36 PM »

I've used primos, galenikas, karachi, etc. I've never had a problem with amps. You don't need a glass filer. You just have to learn the proper technique. I use a towel and have never broken any amps once I figured out the right amount of pressure. You have to almost do it in a fast jerky like motion.

iron_dawg · « **Reply #15 on:** December 30, 2008, 01:43:12 PM »

Quote from: MuscleMcMannus on December 30, 2008, 01:41:36 PM

I've used primos, galenikas, karachi, etc. I've never had a problem with amps. You don't need a glass filer. You just have to learn the proper technique. I use a towel and have never broken any amps once I figured out the right amount of pressure. You have to almost do it in a fast jerky like motion.

you Arab too?

jtsunami · « **Reply #16 on:** December 30, 2008, 01:44:59 PM »

Quote from: iron_dawg on December 30, 2008, 01:43:12 PM

you Arab too?

I hope he is, the more Arabs the more peaceful and knowledgeable this earth will be.

jt

iron_dawg · « **Reply #17 on:** December 30, 2008, 01:46:12 PM »

Quote from: jtsunami on December 30, 2008, 01:44:59 PM

I hope he is, the more Arabs the more peaceful and knowledgeable this earth will be.

jt

JT just playing along bro...sliced white bread...Dawg

Luv2Hurt · « **Reply #18 on:** December 30, 2008, 02:02:22 PM »

Glass file sounds like a good idea. Or you could buy for about $5-$10 an amp opener, never tried one but places that sell pins usually sell them.

Some amps break off fairly easy, but some you need to score the neck so you dont shatter the whole thing.

jtsunami · « **Reply #19 on:** December 30, 2008, 02:16:03 PM »

Quote from: Luv2Hurt on December 30, 2008, 02:02:22 PM

Glass file sounds like a good idea. Or you could buy for about $5-$10 an amp opener, never tried one but places that sell pins usually sell them.

Some amps break off fairly easy, but some you need to score the neck so you dont shatter the whole thing.

I have tried an amp opener before, either I didn't know how to use it, or it was a crappy one, cause one of my amps blew up in it.

jt

bugsy187 · « **Reply #20 on:** December 30, 2008, 02:40:59 PM »

Yeah...I am gonna give the filer option a try. I heard that amp openers are worthless..!some say they break amps...but than again...i think you do need to right about of pressure..!

busyB · « **Reply #21 on:** December 30, 2008, 05:47:55 PM »

Quote from: Luv2Hurt on December 30, 2008, 02:02:22 PM

Glass file sounds like a good idea. Or you could buy for about $5-$10 an amp opener, never tried one but places that sell pins usually sell them.

Some amps break off fairly easy, but some you need to score the neck so you dont shatter the whole thing.

HATED the amp opener!

I bought one thinking it would be so great and the damn tops of the amps shatter in that thing.

Going back to towel method with a little filing before popping. ((No, not arab, I'm a wop so dont even ask))

jtsunami · « **Reply #22 on:** December 30, 2008, 05:55:28 PM »

lol, well even if you arn't Arab we can get along

busyB · « **Reply #23 on:** December 30, 2008, 06:06:11 PM »

Quote from: jtsunami on December 30, 2008, 05:55:28 PM

lol, well even if you arn't Arab we can get along

OF COURSE!

Much love for my getbigger's....even if you all are not ITALIAN! Not everyone can be that perfect

Luv2Hurt · « **Reply #24 on:** December 31, 2008, 07:21:14 AM »

Quote from: jtsunami on December 30, 2008, 02:16:03 PM

I have tried an amp opener before, either I didn't know how to use it, or it was a crappy one, cause one of my amps blew up in it.

jt

Quote from: busyB on December 30, 2008, 05:47:55 PM

HATED the amp opener!

I bought one thinking it would be so great and the damn tops of the amps shatter in that thing.

Going back to towel method with a little filing before popping. ((No, not arab, I'm a wop so dont even ask))

Well Im glad I never got one, good to know they suck. will not waste my money.

Author Topic: Amp to Vial Transfer (Read 4826 times)

4thAD