Author Topic: Homebrewing Finaject, Project List: (Read 7721 times)

Hitman_Forhire · « **on:** February 11, 2006, 11:34:29 PM »

Actually I'm looking into this very seriously for the homebrew use. I've put together a mass of documentation and such and have so far come up with a very cheap turnaround for getting 100mg/ml [so you can do 1cc EOD or ED - your choice]

Yeilds 40ml

20 Pellets @ 200mg Tren Each = $60
4g Conv. Kit = $25
Pins for 12wks, eod = $10.50
PCT [clomid is fine] =XXX

Total - PCT = < $91.00

For less than 91 Bucks you got more than you need to do 100mg of finaject eod for 12 wks.

Whip up some clomid [or find some laying under the nearest book/pillow

] and you're in business and with [mostly] no worries about gyno. Just be really sure you're extra careful and steril along the making process, and ensure that you hit clomid/PCT hard because I've read of some pretty serious shutdown after this.

Hitman_Forhire · « **Reply #1 on:** February 11, 2006, 11:36:02 PM »

I found a great SIMPLE how to with pics here:

http://www.basskilleronline.com/finaplix_directions_01.html

Very Helpful...

I can post the link to the place he got that exact belt from is need be, I GUESS it's OK since it's legal, but I won't source post here.

muscle19 · « **Reply #2 on:** February 12, 2006, 01:36:03 AM »

trust me bro, it is simple and VERY effective, very cheap as well compared what u could buy it for. worked great for me, no infections, no abcess, no nuttin! good luck

muscle

Hitman_Forhire · « **Reply #3 on:** February 12, 2006, 08:55:28 AM »

Yeah, and luckily for me, that's one of the things I can ensure [cleanliness] I've done a ton of chemistry projects and have lots of experience ensuring that things don't get contaminated and remain sterile. I'm more than confident that I can make this work completely successful.

jpeso · « **Reply #4 on:** February 12, 2006, 09:03:02 AM »

Word!

I've got a chemistry background also (curse Chem Lab no more!) I would love to give something simple like this a shot.

Safety FIRST!

Hitman_Forhire · « **Reply #5 on:** February 12, 2006, 09:54:49 AM »

Yep, those instructions make this nearly fool proof if you understand anything about keeping things sterile and tidy. I've been scouring the net for a few weeks now and there are literally hundreds of places to get all the info you need.

I would recommend this to most to check into. I'll have all of my supply's soon and I"ll do a log on my progress to see how it goes. I plan to do some thorough testing with various dosages etc.

JamieX4200 · « **Reply #6 on:** February 12, 2006, 03:24:49 PM »

would you mind pming me the site...?

thanks

Double XL · « **Reply #7 on:** February 12, 2006, 03:36:35 PM »

screw fina pellets, just get the powder.

Hitman_Forhire · « **Reply #8 on:** February 12, 2006, 04:01:22 PM »

But powder isn't legal to buy OTC, or as available in small batches.

Hitman_Forhire · « **Reply #9 on:** February 12, 2006, 04:03:23 PM »

Oh yeah, just for some info. "Component TH" [search on google.com or froogle.com for listings- NOTE that's not a source post

] ...But this does NOT have to be seperated as it's PURE TBA, it's not like provirin where you have to go through a big drawn out process to seperate it from Estrogen or anything, it's just a simple straight forward process.

Double XL · « **Reply #10 on:** February 12, 2006, 04:11:45 PM »

Quote from: Hitman_Forhire on February 12, 2006, 04:01:22 PM

But powder isn't legal to buy OTC, or as available in small batches.

just curious, how much do you end up paying for the final product, price per 1000mg.....

Hitman_Forhire · « **Reply #11 on:** February 12, 2006, 04:32:10 PM »

From powder? Not Sure I"m not using that, but if you mean from finaplix, it doesn't even come in that low of amount. The lowest you can get it is 2000mg. But for price sake I'm going do 4000mg at a time. The cost is rediculous for the final product alone. it's only:

Kit = $25
Pellets = $60
+ 1 hour of your time.

final result is 40ml of 100mg/ml.

Hitman_Forhire · « **Reply #12 on:** February 13, 2006, 08:48:50 AM »

Ok it seems to me that after a little more research, when a place asks for "proof of cattle ownership" all they need is a feed reciept or something similar. This can be had tons of ways, I'll leave the creativity to you.

What else I found is that the cheapest place I could find the "Component TH" pellets at states that "PROOF OF CATTLE OWNERSHIP REQUIRED." ....I went 3/4 of the way through the ordering process and never saw anything like that. I heard rumored that sometimes you are asked upon signing by the UPS guy??? This sounds like total BS to me so I devised a plan though just in case. All you have to do is type up a bogus letter saying "Thanks for your "Cattle Ownership Verification" and then put a random name at the bottom and sign it. If the GUY Does ask you, [I'm sure UPS guys run across this like once in a lifetime or such:. then you can fire back with: "Oh I went ahead and faxed it with my order, I have the slip if you need to see it...." Then just whip that out to make him feel extra comfortable that he'd doing the right thing and after that he'll probably never ask you again.

I"m going to do an order using the above method soon. I hope to post a success in doing so as well. I'll keep you guys informed.

jpeso · « **Reply #13 on:** February 13, 2006, 10:36:58 AM »

Let us know bro

NYCDVR · « **Reply #14 on:** February 13, 2006, 06:02:31 PM »

OK I have done a couple conversions and I think the picture basskiller conversion is a good place to start

However here is were I disagree

Let your pellets sit in the magic for a couple days the glue binders will seperate then add the solution to the oil in a seperate vial

Not the oil to the solution in the same vial

That way your seperating the gunk before you mix with the oil

Filtering will be 100% easier and you do not have the same kind of settling in oil

The gunk settles much better in the magic solution than in oil less waste

Just my .02

Hitman_Forhire · « **Reply #15 on:** February 13, 2006, 09:18:59 PM »

Awesome thanks NYCDVR, I"ll add that step in once I finish rounding up the materials, and I encourage any useful tips of this nature from other experienced home brewers! Thanks.

DIVISION · « **Reply #16 on:** February 15, 2006, 01:03:09 AM »

Quote from: Hitman_Forhire on February 13, 2006, 08:48:50 AM

Ok it seems to me that after a little more research, when a place asks for "proof of cattle ownership" all they need is a feed reciept or something similar. This can be had tons of ways, I'll leave the creativity to you.
What else I found is that the cheapest place I could find the "Component TH" pellets at states that "PROOF OF CATTLE OWNERSHIP REQUIRED." ....I went 3/4 of the way through the ordering process and never saw anything like that. I heard rumored that sometimes you are asked upon signing by the UPS guy??? This sounds like total BS to me so I devised a plan though just in case. All you have to do is type up a bogus letter saying "Thanks for your "Cattle Ownership Verification" and then put a random name at the bottom and sign it. If the GUY Does ask you, [I'm sure UPS guys run across this like once in a lifetime or such:. then you can fire back with: "Oh I went ahead and faxed it with my order, I have the slip if you need to see it...." Then just whip that out to make him feel extra comfortable that he'd doing the right thing and after that he'll probably never ask you again.
I"m going to do an order using the above method soon. I hope to post a success in doing so as well. I'll keep you guys informed.

Bro,

You don't have to go through all that just to buy some Finaplix pellets.

Do a google.com search and I can promise you that they won't ask for any proof of "cattle ownership". It's easy. I've done it.

If you have problems, PM me.

DIV

Hitman_Forhire · « **Reply #17 on:** February 15, 2006, 06:01:35 AM »

Yeah, I saw plenty of places to get it but the one place that is about 40 dollars cheaper [per strip!!] mentions about the verification, so in the long run it might be worth my hassle as it would save me like 200 bucks on a carton. I'll hunt a bit more for some cheaper ones that dont' ask for it, [this place is just a Yahoo store, nothing crazy, they just have GREAT prices.] like 58 bucks for enough pellets to yeild 40ml. Which I don't mind paying a few extra for one strip. But I know a few guys who are also going to give this a shot bulk order is a better idea especially because it make it about 30 bucks per strip that way.

JamieX4200 · « **Reply #18 on:** February 19, 2006, 11:52:08 PM »

Hitman, out of those sites you pmed me, please let me know which one you go with... thanks

Hitman_Forhire · « **Reply #19 on:** February 21, 2006, 11:11:24 AM »

I hit ya back.

JamieX4200 · « **Reply #20 on:** February 21, 2006, 11:20:19 AM »

When exactly does the backing process take place? I've only read about it from basskiller... It's not included in his picture directions.

JamieX4200 · « **Reply #21 on:** February 21, 2006, 03:03:03 PM »

Quote from: NYCDVR on February 13, 2006, 06:02:31 PM

OK I have done a couple conversions and I think the picture basskiller conversion is a good place to start
However here is were I disagree
Let your pellets sit in the magic for a couple days the glue binders will seperate then add the solution to the oil in a seperate vial
Not the oil to the solution in the same vial
That way your seperating the gunk before you mix with the oil
Filtering will be 100% easier and you do not have the same kind of settling in oil
The gunk settles much better in the magic solution than in oil less waste
Just my .02

Could you explain what part of the process... I'd really appreciate it.. I wanna do it right... Like which picture do "you" say is backwards?

JamieX4200 · « **Reply #22 on:** February 28, 2006, 06:09:17 AM »

The belt say they should be stored in the fridge.. after you convert should you still keep your tren in the fridge yout not using..?

thanks,
jamie

JamieX4200 · « **Reply #23 on:** February 28, 2006, 05:33:59 PM »

Also muscle or hitman... after filter through the watman... should it look like theres some gunk left over in there?

JamieX4200 · « **Reply #24 on:** February 28, 2006, 06:13:18 PM »

Muscle and Hitman, I keep tryin to pm you guys but it doesn't show as going through so if it did a few times my bad... but since this is just a "hypothetical" question...heres what the pm says...

"yeah thanks hitman for the good luck-- i made one bottle aldready, and started the 2nd, while the other two dissolve in the pellets.. Im follong basskillers directions except i filter the pellets with the "magic solution" (ba) into the oil vial after I remove 3 cc... But when i finish as the question I posted before... does the whatman filter look somewhat dirty like theres tren in it but not? cause i cant squeeze anymore out of it...
So like you said these should come out at 100mg/ml(cc) with 40ML... and at EOD that would equal 80 days... But listen what do you fellas think of running a half cc ED...?"

thanks,
jamie