Author Topic: Opening amps...  (Read 3553 times)

VegasPole

  • Getbig II
  • **
  • Posts: 41
Opening amps...
« on: April 09, 2006, 02:28:40 PM »
Hey guys... I searched around and couldn't find any old articles on the subject... What's the best way to open amps? ??? My buddy told me he uses a nail file and goes around the edge... 
I just don't want to f up and waste precious stuff... ;)
Never Relax Around Blacks

bigjohn_bluesfan

  • Getbig IV
  • ****
  • Posts: 1467
  • yeah baby
Re: Opening amps...
« Reply #1 on: April 09, 2006, 05:07:36 PM »
go to researchchemist.com    or getpinz.com   and buy an amp opener for 3 bucks.... if you place the order now it will be at your house by friday
ah yeah Im a voodo child

musclestang

  • Getbig II
  • **
  • Posts: 170
  • Getbig!
Re: Opening amps...
« Reply #2 on: April 09, 2006, 05:21:10 PM »
i just use a pen cap, place the top of the amp in the pen cap and hold it in ur hand then push on the pen cap with ur thumb and it snaps off.

ZEEK

  • Time Out
  • Getbig IV
  • *
  • Posts: 1237
  • WTF this stuff really works
Re: Opening amps...
« Reply #3 on: April 09, 2006, 05:24:17 PM »
it also depends on what amps you have.

if it has the ring already in the beval then its easy to snap


freeagain

  • Time Out
  • Getbig IV
  • *
  • Posts: 2004
  • Getbig!
Re: Opening amps...
« Reply #4 on: April 09, 2006, 05:24:36 PM »
huh?

 just snap the f'uckin top off you f'uckin arsebandits!  ::)

jeez.. dont tell me you too f'uckin weak to snap a bit of glass off ??

oh .. if you really 'terrified' of cuttin your precious lil digits (boo hoo) do it in a teatowel!


bigjohn_bluesfan

  • Getbig IV
  • ****
  • Posts: 1467
  • yeah baby
Re: Opening amps...
« Reply #5 on: April 09, 2006, 05:59:03 PM »
you guys are retarded
ah yeah Im a voodo child

VegasPole

  • Getbig II
  • **
  • Posts: 41
Re: Opening amps...
« Reply #6 on: April 09, 2006, 10:40:23 PM »
Thanks.
Never Relax Around Blacks

gtbro1

  • Getbig V
  • *****
  • Posts: 6893
Re: Opening amps...
« Reply #7 on: April 09, 2006, 10:44:17 PM »
  buy  the opener for 3 bucks.

Euro-monster

  • Getbig V
  • *****
  • Posts: 7583
  • Team Dutchie style!!
Re: Opening amps...
« Reply #8 on: April 10, 2006, 03:56:48 AM »
Just snap it of.. it really isn't that hard... ::)
?

wes mantooth

  • Getbig IV
  • ****
  • Posts: 3388
  • Dorothy Mantooth is a saint!
Re: Opening amps...
« Reply #9 on: April 10, 2006, 08:00:25 AM »
i just use a pen cap, place the top of the amp in the pen cap and hold it in ur hand then push on the pen cap with ur thumb and it snaps off.

this is the way i open them

freeagain

  • Time Out
  • Getbig IV
  • *
  • Posts: 2004
  • Getbig!
Re: Opening amps...
« Reply #10 on: April 10, 2006, 08:07:49 AM »
your the only pussy on this site.

i do it my way and you do it your

Ill snap your fucking neck real quick.

and im not the one wanting to know how to open a amp

oh really ??

and how you gonna do that sailor ??

use a f'uckin pen top !!


DIVISION

  • Getbig V
  • *****
  • Posts: 16278
  • Bless me please, father.....
Re: Opening amps...
« Reply #11 on: April 10, 2006, 12:47:32 PM »
Hey guys... I searched around and couldn't find any old articles on the subject... What's the best way to open amps? ??? My buddy told me he uses a nail file and goes around the edge... 
I just don't want to f up and waste precious stuff... ;)

You've got to be fu.cking kidding me...

You snap the top off with your fingers.  The glass is too fine to hurt you.  If you aren't strong enough to snap the top off, I question you using AAS at all.

Some of you amaze me with your questions.

Who really takes the time to tape a glass amp and use a hammer?

Amazing shit........ ::)

I thought I'd heard it all....



DIV
I'm a ghost in these killing fields...

ZEEK

  • Time Out
  • Getbig IV
  • *
  • Posts: 1237
  • WTF this stuff really works
Re: Opening amps...
« Reply #12 on: April 10, 2006, 03:54:50 PM »
well shit were not all wanna be pro's.

i havent lost a drop from any amp ive opened.

how many times have you broken one completely?

if you say none your full of shite and Ill slap you

with a wet noodle.  ;)

ZEEK

  • Time Out
  • Getbig IV
  • *
  • Posts: 1237
  • WTF this stuff really works
Re: Opening amps...
« Reply #13 on: April 10, 2006, 04:21:02 PM »
I love it.  ;D ;D

the crazy thing is someone might try it

VegasPole

  • Getbig II
  • **
  • Posts: 41
Re: Opening amps...
« Reply #14 on: April 10, 2006, 05:34:10 PM »
You've got to be fu.cking kidding me...

You snap the top off with your fingers.  The glass is too fine to hurt you.  If you aren't strong enough to snap the top off, I question you using AAS at all.

Some of you amaze me with your questions.

Who really takes the time to tape a glass amp and use a hammer?

Amazing shit........ ::)

I thought I'd heard it all....



DIV

Sorry God.

I wasn't worried about hurting myself or not being "strong enough", I was more worried about spilling my synthetic nuts on the floor.....But I do agree with you on the hammer...WTF ???
Never Relax Around Blacks

ZEEK

  • Time Out
  • Getbig IV
  • *
  • Posts: 1237
  • WTF this stuff really works
Re: Opening amps...
« Reply #15 on: April 10, 2006, 06:30:05 PM »
you wont get hurt if you know what your doing

DIVISION

  • Getbig V
  • *****
  • Posts: 16278
  • Bless me please, father.....
Re: Opening amps...
« Reply #16 on: April 10, 2006, 08:02:07 PM »
well shit were not all wanna be pro's.

i havent lost a drop from any amp ive opened.

how many times have you broken one completely?

if you say none your full of shite and Ill slap you

with a wet noodle.  ;)

I actually did "shatter" one amp of Sustanon.

Considering how many amps I've done, that's not bad.




DIV
I'm a ghost in these killing fields...

bigjohn_bluesfan

  • Getbig IV
  • ****
  • Posts: 1467
  • yeah baby
Re: Opening amps...
« Reply #17 on: April 10, 2006, 08:13:07 PM »
I actually did "shatter" one amp of Sustanon.

Considering how many amps I've done, that's not bad.




DIV



the best way to keep from shattering amps is: completely duck tape the whole amp. Tie some fine thread to the top part of it and tie that part to a tree. Tie another piece of thread to the bottom part of the amp and tie that piece to the trailer hitch on your truck. put your truck in low 2 and ease forward just enough to tighten the string and break the top off the amp. make sure that you have a bowl under the amp to catch it. if any of the gear spills into the nbowl you can draw it out with a needle. I have found this to be the safest way to open amps. ;)
ah yeah Im a voodo child

DIVISION

  • Getbig V
  • *****
  • Posts: 16278
  • Bless me please, father.....
Re: Opening amps...
« Reply #18 on: April 10, 2006, 08:16:20 PM »


the best way to keep from shattering amps is: completely duck tape the whole amp. Tie some fine thread to the top part of it and tie that part to a tree. Tie another piece of thread to the bottom part of the amp and tie that piece to the trailer hitch on your truck. put your truck in low 2 and ease forward just enough to tighten the string and break the top off the amp. make sure that you have a bowl under the amp to catch it. if any of the gear spills into the nbowl you can draw it out with a needle. I have found this to be the safest way to open amps. ;)

Have you girlfriend break it off in her teeth.....





DIV
I'm a ghost in these killing fields...

ZEEK

  • Time Out
  • Getbig IV
  • *
  • Posts: 1237
  • WTF this stuff really works
Re: Opening amps...
« Reply #19 on: April 10, 2006, 08:19:23 PM »
LMAO  hahahahahaha ;D

blondmusclhunk

  • Getbig III
  • ***
  • Posts: 638
Re: Opening amps...
« Reply #20 on: April 12, 2006, 08:42:32 AM »
Jeez.  Just snap it off.  Its quick and easy.  Ive never had one shatter.

DirtyDirt

  • Getbig II
  • **
  • Posts: 255
  • 1 DiRty Dawg eat dawg world...
Re: Opening amps...
« Reply #21 on: April 13, 2006, 06:15:10 AM »
Personally I use bigjohnbluesfan method however, instead of a hitch, I tie it to my horse's tail and yell "GIDDYAP MUTHA FUCKER!!!"

Oh and I don't use a bowl, I rent a midget for an hour, he stands there and holds the amp as the horse runs away. Haven't lost a drop yet...

blondmusclhunk

  • Getbig III
  • ***
  • Posts: 638
Re: Opening amps...
« Reply #22 on: April 13, 2006, 07:57:49 AM »
There's even a better way get a straight razor blade and make sure your fingers our grasped tightly around the neck of it and cut real hard

Loomis

  • Getbig III
  • ***
  • Posts: 786
Re: Opening amps...
« Reply #23 on: April 13, 2006, 08:00:55 AM »
Personally I use bigjohnbluesfan method however, instead of a hitch, I tie it to my horse's tail and yell "GIDDYAP MUTHA FUCKER!!!"

Oh and I don't use a bowl, I rent a midget for an hour, he stands there and holds the amp as the horse runs away. Haven't lost a drop yet...
I almost spit out my coffee reading this, lol.

blondmusclhunk

  • Getbig III
  • ***
  • Posts: 638
Re: Opening amps...
« Reply #24 on: April 13, 2006, 08:16:01 AM »
hah the funny thing is there is some dimwit that would try these stupid things out there