Author Topic: Anyone make their own steroids at home ? HOME BREWS  (Read 1899 times)

BlackMetallic

  • Getbig V
  • *****
  • Posts: 10800
  • I am Jack's lack of HRT skills
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #25 on: April 11, 2025, 02:32:07 PM »
I would've loved to have done it but I just never wanted the headache of importing the powders. Only reason. Easy to do the brewing. You could save SO much :D

I'm not positive, but I don't think abscesses from gear are due to bacteria in the product if made as instructed. The filter is supposed to take care of that, the alcohol prevents bacteria from growing and so on. I don't know what all factors cause abscesses but maybe a poor immune system could have something to do with it? Excessive alcohols could cause cellulitis I think. It's amazing I never had an abscess if black market gear is as dirty as many assume.

I’ve used lots of gear made without using filters ( white man’s way) and I’ve never had an abscess

Van_Bilderass

  • Getbig V
  • *****
  • Posts: 16919
  • "Don't Try"
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #26 on: April 11, 2025, 02:46:56 PM »
I’ve used lots of gear made without using filters ( white man’s way) and I’ve never had an abscess

Why no filters? Too time consuming or laborious? I assume you baked for sterility? I think I read somewhere UG labs use some type of pneumatic pumps when mass producing. One fella said he's been so careful with UG gear that he always filtered and baked branded products he bought, even pharma gear he wasn't positive was legit. And even baked US Rx testosterone from the pharmacy to make it less painful.

I got a shitload of a painful batch of gear for free a while ago. Have tried baking it without much success. Shame to throw it away as it's potent otherwise. Shooting low volumes. Some kind of issue with China testosterones, painful raws for some reason.

BlackMetallic

  • Getbig V
  • *****
  • Posts: 10800
  • I am Jack's lack of HRT skills
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #27 on: April 11, 2025, 03:08:51 PM »
Why no filters? Too time consuming or laborious? I assume you baked for sterility? I think I read somewhere UG labs use some type of pneumatic pumps when mass producing. One fella said he's been so careful with UG gear that he always filtered and baked branded products he bought, even pharma gear he wasn't positive was legit. And even baked US Rx testosterone from the pharmacy to make it less painful.

I got a shitload of a painful batch of gear for free a while ago. Have tried baking it without much success. Shame to throw it away as it's potent otherwise. Shooting low volumes. Some kind of issue with China testosterones, painful raws for some reason.

I should have clarified: I’ve bought gear that was brewed without filters

I’ve never cooked myself

20 years ago I watched a guy who had a resemblance to a young Everlast “rapper”
He was benching 405 for 20 on the smith machine

Anyways I got to talkin to him and said he cruised year round

I went over to his house while he was brewin and I said no filters?

His answer “ fuck no, white mans way”

robcguns

  • Getbig V
  • *****
  • Posts: 20382
  • Founder of the proud straight white male movement
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #28 on: April 11, 2025, 03:32:02 PM »
I should have clarified: I’ve bought gear that was brewed without filters

I’ve never cooked myself

20 years ago I watched a guy who had a resemblance to a young Everlast “rapper”
He was benching 405 for 20 on the smith machine

Anyways I got to talkin to him and said he cruised year round

I went over to his house while he was brewin and I said no filters?

His answer “ fuck no, white mans way”


That’s crazy strong.

BlackMetallic

  • Getbig V
  • *****
  • Posts: 10800
  • I am Jack's lack of HRT skills
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #29 on: April 11, 2025, 04:36:41 PM »

That’s crazy strong.

A weak set for him was only getting 15 reps with that weight

I don’t remember all of his gear

He said: At peak use per week

7grams of test
4 grams deca
150 grams tren Ace ed
12 iu’s ed

wes

  • Competitors
  • Getbig V
  • *****
  • Posts: 71587
  • What Dire Mishap Has Befallen Thee
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #30 on: April 11, 2025, 04:59:07 PM »
I`ve got quite a bit of a variety of gear that I was gonna` use for my last show until the bottom fell out.

Gonna` try to sell it to this kid I met at the gym who is a C.O. who just started using a while back cuz I`ll never use it again.   :(

falco

  • Getbig V
  • *****
  • Posts: 21110
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #31 on: April 14, 2025, 02:25:53 AM »
I thought this thread was about history:


LurkerNoMore

  • Getbig V
  • *****
  • Posts: 33808
  • Dumb people think Trump is smart.
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #32 on: April 14, 2025, 05:26:32 AM »
I remember tales of the OG on the UGL scene IP that was making mixes people had never heard of before.  High dose multi compound brews.  Dude had a product called Rocket Fuel and you either loved it or you got an abscess.  There was no middle ground here.  And there seemed to be an equal number of people in both camps.  Which is saying a lot for the number of abscesses that were developing.

Van_Bilderass

  • Getbig V
  • *****
  • Posts: 16919
  • "Don't Try"
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #33 on: April 14, 2025, 09:20:02 AM »
I remember tales of the OG on the UGL scene IP that was making mixes people had never heard of before.  High dose multi compound brews.  Dude had a product called Rocket Fuel and you either loved it or you got an abscess.  There was no middle ground here.  And there seemed to be an equal number of people in both camps.  Which is saying a lot for the number of abscesses that were developing.

I never used IP's oils but I know his list had instructions, "heat oil on spoon." A bit suboptimal from a safety standpoint.

LurkerNoMore

  • Getbig V
  • *****
  • Posts: 33808
  • Dumb people think Trump is smart.
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #34 on: April 14, 2025, 11:30:57 AM »
I never used IP's oils but I know his list had instructions, "heat oil on spoon." A bit suboptimal from a safety standpoint.

I've seen an old list where he instructed to "crash tablets in mouth before swallowing"

Van_Bilderass

  • Getbig V
  • *****
  • Posts: 16919
  • "Don't Try"
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #35 on: April 14, 2025, 12:10:58 PM »
I've seen an old list where he instructed to "crash tablets in mouth before swallowing"

Haha yes, "crash." They thought they were maybe too tightly pressed and wouldn't dissolve properly. I know the Anadrols and Winstrols were potent.

tatoo

  • Getbig IV
  • ****
  • Posts: 3477
Re: Anyone make their own steroids at home ? HOME BREWS
« Reply #36 on: April 14, 2025, 03:11:20 PM »
strango was the best..... hands down.