Author Topic: Mixing compounds  (Read 957 times)

Figo

  • Getbig V
  • *****
  • Posts: 8101
Mixing compounds
« on: September 16, 2009, 06:11:07 AM »
Excuse my ignorance here, but always wondered... :-[

How does one extract 2 or more compounds into one syringe without mixing them or messing it up? ???


Tats

  • Getbig II
  • **
  • Posts: 187
  • Get Big!
Re: Mixing compounds
« Reply #1 on: September 16, 2009, 06:27:14 AM »
Having them mix in the syringe is no issue.  ???
All Gas!

dyslexic

  • Getbig V
  • *****
  • Posts: 7676
  • baddoggy
Re: Mixing compounds
« Reply #2 on: September 16, 2009, 06:55:30 AM »
You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

Figo

  • Getbig V
  • *****
  • Posts: 8101
Re: Mixing compounds
« Reply #3 on: September 16, 2009, 07:15:34 AM »
You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

Do you use the same drawing pin for all ? , is how I should have phrased question.




tstmaniac

  • Getbig IV
  • ****
  • Posts: 1943
Re: Mixing compounds
« Reply #4 on: September 16, 2009, 07:39:56 AM »
You must mean mixing them in the bottles...


Still no issue.


Just don't mix water and oil.. unless you're gonna inject some Bile too..  ;D


Hopefully you have learned to use a drawing pin for whatever you do?

I have always mixed oils and water based without any issues...no complaints here

benchmstr

  • Getbig V
  • *****
  • Posts: 12476
  • Raging drunk
Re: Mixing compounds
« Reply #5 on: September 16, 2009, 09:30:44 AM »
Do you use the same drawing pin for all ? , is how I should have phrased question.




yes, use the same pin.

bench

Figo

  • Getbig V
  • *****
  • Posts: 8101
Re: Mixing compounds
« Reply #6 on: September 16, 2009, 12:47:16 PM »
thx guys

Luolamies

  • Getbig IV
  • ****
  • Posts: 2520
  • Getbig!
Re: Mixing compounds
« Reply #7 on: September 16, 2009, 11:17:58 PM »
I draw with 21 g, inject with 23 g. When the tip of the pin hits the bottom of the ampoule it dulls a little bit and when you use vials this is still good/safe practice.
TEST+DECA+DBOL=BIG

4thAD

  • Guest
Re: Mixing compounds
« Reply #8 on: September 17, 2009, 09:48:33 AM »
water and oil can be mixed. probably not the prettiest injection, but no problem.