Author Topic: i am engaged!!! (Read 11843 times)

benchmstr · « **Reply #75 on:** March 31, 2010, 06:41:26 PM »

Quote from: ToxicAvenger on March 31, 2010, 09:41:09 AM

i ws almost pissed that u were cheating on me

dont worry bro.....i still yelled out "toxic avenger" last night

bench

240 is Back · « **Reply #76 on:** April 01, 2010, 08:40:38 PM »

great thread

Migs · « **Reply #77 on:** April 05, 2010, 05:25:29 PM »

ok started to paiting my gun. Cutting out stencils is a pain in the rear.

benchmstr · « **Reply #78 on:** April 05, 2010, 05:31:30 PM »

Quote from: Migs on April 05, 2010, 05:25:29 PM

ok started to paiting my gun. Cutting out stencils is a pain in the rear.

what type of stenciling are you doing?

bench

Migs · « **Reply #79 on:** April 05, 2010, 05:45:32 PM »

trying to do a digi camo on it. found a design, transfered it to transperancy paper then put painters tape on the back. After that I cout out the design, peel the tape off, transfer the tape to the gun, spray a coat of corresponding paint, then repeat. takes forever!

benchmstr · « **Reply #80 on:** April 05, 2010, 05:55:49 PM »

Quote from: Migs on April 05, 2010, 05:45:32 PM

trying to do a digi camo on it. found a design, transfered it to transperancy paper then put painters tape on the back. After that I cout out the design, peel the tape off, transfer the tape to the gun, spray a coat of corresponding paint, then repeat. takes forever!

yeah....i just spent $5 and got 1000 pieces of digi cam...

bench

Migs · « **Reply #81 on:** April 05, 2010, 06:05:28 PM »

Quote from: benchmstr on April 05, 2010, 05:55:49 PM

yeah....i just spent $5 and got 1000 pieces of digi cam...

bench

WTF! Where did you get this at? DAMN DAMN DAMN

benchmstr · « **Reply #82 on:** April 05, 2010, 06:21:33 PM »

Quote from: Migs on April 05, 2010, 06:05:28 PM

WTF! Where did you get this at? DAMN DAMN DAMN

gunshow....little stuff like that is the only reason to go to a gunshow...

bench

Migs · « **Reply #83 on:** April 05, 2010, 06:31:56 PM »

damn, not sure when i will have one here. this is tedious

Princess L · « **Reply #84 on:** April 05, 2010, 06:37:23 PM »

Quote from: Migs on April 05, 2010, 06:31:56 PM

damn, not sure when i will have one here. this is tedious

Progress pics please!

Migs · « **Reply #85 on:** April 05, 2010, 06:54:18 PM »

have a coat dryin and cutting stencils now.

Princess L · « **Reply #86 on:** April 05, 2010, 07:14:31 PM »

Looks like you're doing a good job!

A tweezers might help with the application. I'm sure you have one of those

Migs · « **Reply #87 on:** April 05, 2010, 07:19:57 PM »

Quote from: Princess L on April 05, 2010, 07:14:31 PM

Looks like you're doing a good job!

A tweezers might help with the application. I'm sure you have one of those

shush.

actually i am using tqweezers and an exacto knife. I need an assistant. I think i'm going blind cutting this crap out.

benchmstr · « **Reply #88 on:** April 05, 2010, 07:57:26 PM »

Quote from: Migs on April 05, 2010, 07:19:57 PM

shush.

actually i am using tqweezers and an exacto knife. I need an assistant. I think i'm going blind cutting this crap out.

i always used a scalpel....that is all...

bench

Migs · « **Reply #89 on:** April 05, 2010, 08:21:21 PM »

woohoo! i think i'm done cutting out stencils!

Hey bench, the stencils you got, do you remember the manufacturer of them?

benchmstr · « **Reply #90 on:** April 05, 2010, 08:32:31 PM »

Quote from: Migs on April 05, 2010, 08:21:21 PM

woohoo! i think i'm done cutting out stencils!

Hey bench, the stencils you got, do you remember the manufacturer of them?

no i dont.....if i ever go home tonight i will find out though...

bench

Migs · « **Reply #91 on:** April 05, 2010, 08:42:35 PM »

sweet thanks. depending on how this turns out i will do more stuff, just need a more efficient way. This looks interesting though.

Migs · « **Reply #92 on:** April 07, 2010, 08:44:52 AM »

more pics

Migs · « **Reply #93 on:** April 07, 2010, 08:47:02 AM »

it didn't turn out the way i wanted, but considerig i did it pretty quickly and it was my frist attempt i am happy with it. at least it won't stand out as much while i'm in the woods trying to shoot people.

Migs · « **Reply #94 on:** April 07, 2010, 08:54:10 AM »

so i went to clear coat my gun and realized (after it was to late) that I picked up black coat. so the top tube is covered in a light layer of black

There are some places i still need to touch up from removing the tape.

Butterbean · « **Reply #95 on:** April 07, 2010, 09:44:20 AM »

Quote from: Princess L on April 05, 2010, 07:14:31 PM

Looks like you're doing a good job!

A tweezers might help with the application. I'm sure you have one of those

Tweezerman brand no doubt. Only the best for Migs

Migs · « **Reply #96 on:** April 07, 2010, 10:57:55 AM »

Quote from: STella on April 07, 2010, 09:44:20 AM

Tweezerman brand no doubt. Only the best for Migs

sad but true, lol

benchmstr · « **Reply #97 on:** April 07, 2010, 02:33:28 PM »

you did a pretty good job......i krylond one today on my lunch break.....when i finish it later i will post a pic.....i just did a tan base coat.....later i will just throw some sticks and leaves on it and spray it over with brown...

bench

Migs · « **Reply #98 on:** April 07, 2010, 07:25:25 PM »

i figure i'll refine it and then go on to bigger better things

benchmstr · « **Reply #99 on:** April 07, 2010, 07:55:28 PM »

Quote from: Migs on April 07, 2010, 07:25:25 PM

i figure i'll refine it and then go on to bigger better things

i just layed down the brown coat....i literally picked up some sticks, and leaves out of my yard...dropped them on the rifle and painted it...

bench